1. Slide right and then lift the battery door upwards (as shown on
Diagram A).
battery compartment (as shown on Diagram B). Make sure you follow
the correct polarity (+) (-) as indicated.
2. Put the battery door on correct position and slide left to close the
battery door (as shown on Diagram C).
M
Important Note:
To avoid lost images when changing batteries, please make sure your images
are uploaded to your PC or Mac before changing batteries.
Make sure the ION® Digital Camera is connected to your PC or Mac via the USB
cable with your PC or Mac is switched on.
12
6. Battery Installation
Insert the two new AAA alkaline batteries into the
Diagram A
M
Diagram B
ION® Digital Camera User Guide
www.ion-camera.com
M
Diagram C