Page 2
Guide to screen icons Screen Navigation Title area A TWIG Alert call is in progress. Bluetooth connection is switched on. Note that the display symbols may vary All voice calls (both lines if ALS, Bluetooth is active. GSM network indicator. Located depending on, for example, the colour i.e.
You can also press and hold Additional maps for going abroad ..11 Set up ..........4 TWIG Key. Press and hold to start the menu key to swap between open the TWIG Navigation application. applications.
You can also access the main menu when in GPS mode by pressing the Application Battery Switch button Setting time and date The time and date will be updated automatically when the TWIG gets its first GPS position. To enter the time/date menu access the Main menu and select Tools> Cover Settings>Phone and then scroll down to Date and Time and select using Press n...
Alternatively in either 2D or 3D map display press the . to access TWIG Navigation and scroll down to GPS settings Settings>Voice Guidance. Here you can select voice volume.
Tools>Settings>TWIG Alert. Here you can enter the numbers you wish TWIG Alert to TWIG key 8 and selecting route to home. This works only when in the Map screen. call or send text messages to. The text message will also contain information about...
Sending location to a non-TWIG phone Always on is recommended when running navigation whilst using the car adaptor. TWIG can use MMS or e-mail to send your location co-ordinates and/or a map picture GPS power of your location to a non-TWIG mobile phone.
Hot/Quick keys are a way of accessing TWIG features quickly and in the way you When using TWIG as either a GPS device or as a phone while in-car, TWIG should personally prefer. Please note that doing so may affect guidelines in this document.
To make a call from your contacts list enter the Main menu and select Contacts. You can choose to have TWIG predict the words you intend writing from its own built in Scroll to the required contact to call and press l.
Need help?
Do you have a question about the discovery and is the answer not in the manual?
Questions and answers