Advertisement
Quick Links
INSTRUCTION MANUAL
Read these instructions carefully
before using your new machine.
Retain these instructions is a safe
and convenient location.
SAFETY INSTRUCTIONS
• Do
not
use
beverages other than water.
• Do not stack or place objects on
top of the cooler.
• Unplug the power cord before
cleaning or replacing any parts of
the cooler.
• Connect the power cord directly to
a grounded wall outlet. Do not
connect to an extension cord.
• The water dispenser should be
placed at least 10 cm away from
the wall.
www.colorato.net
OF WATER DISPENSER
ΜΟDEL: CLWD-19PW
for
dispensing
Advertisement
Summary of Contents for COLORATO CLWD-19PW
- Page 1 INSTRUCTION MANUAL OF WATER DISPENSER ΜΟDEL: CLWD-19PW Read these instructions carefully before using your new machine. Retain these instructions is a safe and convenient location. SAFETY INSTRUCTIONS • Do dispensing beverages other than water. • Do not stack or place objects on top of the cooler.
-
Page 2: Installation Precautions
1. Specifications & Parts Identification 2. Installation Precautions The unit’s power source is 220V. Only connect the power cord to a grounded 220V outlet. • Only connect the power cord to a wall outlet. Do not use an extensions cord ROHS The symbol on the product means that at the end of its life, the appliance has not to be... - Page 3 3. Placement of your new unit recommended placement dispenser is indoors. • Placement location should be away from direct sunlight and excessive heat, cold and moisture. Place the dispenser on a flat and stable surface. • Unbalanced placement cause excessive noise and/or shaking of the unit. Place the dispenser in a well-ventilated area.
- Page 4 4. Installation Procedures Verify that the stainless steel cold water baffle is securely in place before placement of water bottle. • Remove plastic cap from bottle. • If the cold water baffle is removed, water will not be cooled. • Turn the water bottle upside down, filling the stainless steel tank visible inside of the top of dispenser.
- Page 5 5. Operating your water dispenser This water cooler features two easy-to-use push buttoins. 1. The right button supplies cold water ranging from 5 °C ~ 10 °C. 2. The left button supplies hot water ranging from 78 °C ~ 85 °C. To activate, push the safety catch to the left and press the button located on the top of the unit.
- Page 6 6. Cleaning your water dispenser It’s easy to keep your high-quality, two temperature water dispenser in clean condition year round. Just keep several basic cleaning items on hand and set aside a few minutes to clean your dispenser every 3-6 months (recommended).
- Page 7 7. General Precautions The water from the ht faucet is extremely hot and can cause injury. Children should not be allowed to operate the hot water faucet. The cooler is equipped with a “child resistant” hot water dispensing device to help prevent injury to children.
-
Page 8: Troubleshooting Guide
8. Troubleshooting Guide Problems Causes Solution Power cord is not connected Verify connections and power to the outlet or dispenser availability No cold water and no hot water Fuse blown Replace fuse The cold water temperature Set the temperature control control dial is set to low dial to a colder setting cooling...
Need help?
Do you have a question about the CLWD-19PW and is the answer not in the manual?
Questions and answers