CALIFORNIA PROP 65 WARNING Warning: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: ...
GENERAL SAFETY WARNINGS IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL SAFETY AND OPERATIONAL INSTRUCTIONS. Failure to follow the safety rules listed below and other basic safety precautions may result in serious personal injury. KEEP THIS MANUAL, SALES RECEIPTS AND APPLICABLE WARRANTY FORMS FOR FUTURE REFERENCE.
GENERAL SAFETY WARNINGS ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA Z94.3 or ANSI SAFETY STANDARD Z87.1 FLYING DEBRIS can cause permanent eye damage. Prescription eyeglasses ARE NOT a replacement for proper eye protection. The usage of a safety standard compliant face shield placed over proper safety glasses or goggles can reduce the risk of facial injury.
GENERAL SAFETY WARNINGS WARNING: Ventilation openings in batteries and chargers must always be open to allow cooling air to circulate freely. Air vents that are blocked, restricted or covered may result in the battery or charger overheating. Overheating may lead to damage to the tool or cause a fire, resulting in possible serious injury.
ELECTRIC GARDENING TOOL SAFETY General Electric Gardening Tool Safety Do not force the tool. Use the correct tool for Warnings – Personal Safety the application. The correct power tool will do the job better and safer when used at the rate for which it was designed.
SPECIFIC SAFETY RULES WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects, or other reproductive harm.
Page 8
SPECIFIC SAFETY RULES WARNING: Avoid operating the blower near property that Use hearing can be easily damaged by thrown or ricocheting protection. Use hearing protection objects such as screens, windows, building such as ear plugs or ear mufflers to siding, glass doors and vehicles. protect your hearing, particularly if the blower is used for extensive periods or if the surrounding WARNING:...
Page 9
SPECIFIC SAFETY RULES WARNING: WARNING: Dust created by use of this Check the blower product may contain chemicals known to the fan screen before each use to make State of California and medical experts to sure the air intake screen and the cause cancer, respiratory injuries, birth fan are on good condition.
Page 10
SPECIFIC SAFETY RULES Never use a pressure washer, garden hose or any other liquid or chemical solvents to clean the blower. WARNING: When blowing very dusty materials in extremely dry conditions for long periods of time, static electricity may build up and discharge without warning.
BATTERY & CHARGER SAFETY WARNING: Do not use an extension cord. Plug the charger Only use the diagnostic cord directly into an electrical outlet. charger supplied with this kit to charge the 20V Li-ion battery. Charging any other Use the charger only in a standard 120V, 60 Hz batteries may damage the charger and electrical outlet.
Keep bystanders back at least Risk of fire 50' (15m) This symbol designates that this tool is listed with U.S. requirements by ETL Testing Laboratories, Inc. Conforms to UL Std. 1017. Certified to CAN/CSA STD C22.2 NO. 3131666 147-M90. JDBL01...
ASSEMBLY AND OPERATING CHARGING THE BATTERY PACK Place the battery charger (1) in a dry location near a 110–120V 60 Hz electrical outlet (Fig. 1). Plug the battery charger into the outlet and make sure the green LED indicator light (5) comes ON.
ASSEMBLY AND OPERATING INSTALLING THE BATTERY PACK IN THE Install the nozzle assembly to the blower as BLOWER follows: Remove the discharged battery pack (1) Slide the large end of the rear nozzle from the tool by pressing the battery section (4) over the blower intake (5) release button (2) on the rear of the battery (Fig.
ASSEMBLY AND OPERATING CLEANING THE AIR INTAKE WARNING It is important to provide unrestricted air flow into the blower fan. Check the air intake grille For safety reasons, the operator must often to make sure it is clean and not restricting read the sections of this Owner’s Manual the incoming air.
MAINTENANCE GENERAL BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING WARNING: When servicing, use only To preserve our natural resources, please identical replacement parts. The use of any recycle or dispose of batteries properly. other part may create a hazard or cause product damage.
PARTS LIST WARNING: When servicing, use only original equipment replacement parts. The use of any other parts may create a safety hazard or cause damage to the blower. Any attempt to repair or replace electrical parts on this blower may create a safety hazard unless repairs are performed by a qualified technician.
3-Year Limited Warranty This product is warranted for three (3) year against any defects in material and workmanship. If defective; the product will be replaced free of charge. Simply provide proof of purchase and return the product to your place of purchase.
Need help?
Do you have a question about the JDBL01 and is the answer not in the manual?
Questions and answers