XMOD Modded Controller
PROGRAMMING RAPID FIRE SPEEDS
The controller can remember up to 5 different Rapid Fire speeds in "shots per second". It's
important to know that each video game may have a speed cap.
This cap can be different for every game. If you try to set your Rapid Fire speed above this cap, your
gun will actually shoot slower, or not shoot at all.
Always try starting out at a slower speed and increase your speed in small intervals. Start out at a
low speed, then increase it until you feel that the gun is starting to "sputter" or slow down. At that
point, you are probably reaching the game's speed cap.
Many different factors can affect the performance of your Rapid Fire controller, including your
console, the quality of your Internet connection and whether or not you are the current host of the
match.
To modify any speeds:
● Set the XMOD Controller on the speed you want to adjust (1-5).
● Turn ALL modes/functions OFF (Hold X+Circle and Tap Mode button)
● Hold the LT+ RT + MODE button simultaneously for 2 seconds to enter in "Speed Programming"
● Release the buttons.
After enter in " Speed Programming":
● Tap X button to INCREASE speed.
● Tap Circle button to DECREASE speed.
● TAP the MODE button to set it back to DEFAULT speed.
● To SAVE and EXIT: Hold the LEFT Trigger and Tap the MODE button.
You can TEST your speed by pushing the RIGHT Trigger (RT) at any time.
The LEDS will flash when the MAXIMUM or MINIMUM speed are reached.
Repeat the same actions to adjust each speed.
Each speed must be programmed individually. They can be adjusted from 5 to 30 shots per second.
You can RESET to DEFAULT each speed individually or you can RESET ALL SPEEDS to Factory Settings
just in one action.
PS4 30 MODES
Need help?
Do you have a question about the 30 MODES and is the answer not in the manual?
Questions and answers