Table of Contents
Advertisement
Troubleshooting
Problem
No picture.
Cannot see any information
on the display (OSD and video)
and the power LED is blue.
No color.
Color is not correct,
Dark picture.
_____________________________________________________________
Remote control does not
operate.
For service, support and warranty information, visit
1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443.
"Polaroid" is a registered trademark of Polaroid Corporation of Waltham, MA USA and licensed for
use on the PLA-4260MTR to Petters Consumer Brands, LLC.
Possible Solution
Make sure the power cord is connected
securely.
Turn on the power of the PDP.
Check DVI cable connections.
Turn off AC power of the PDP and the
video input source and turn on again.
Press MODE to select the desired Picture
Mode.
Adjust the Picture Mode options in the
Video menu.
The batteries could be weak. Replace the
batteries.
Check the polarity of the batteries.
Press the TV button.
Point the remote control at the remote control
sensor of the PDP.
Install the PDP away from fluorescent lights.
www.polaroidelectronics.com
22
or in the US call
Advertisement
Table of Contents
