Controls And Linkage; Electrical Connections - Polaris Xer Owner's Manual

ADULT SECTION
Maintenance
Lubrication Recommendations
Inspect and lubricate all greaseable components at the intervals outlined
in the Periodic Maintenance Chart beginning on page 50.

Controls and Linkage

Lubricate all bushings, spindle shafts, and tie rod ends with a light coat
of oil or grease. Lubricate throttle and brake controls and cables with
Polaris Premium All Season Grease. Force a small amount of lubricant
down the cable.
Bearings
Always grease drive shaft clutch side bearings with a high quality bear-
ing grease to prevent corrosion, which will destroy the bearings.

Electrical Connections

Separate the electrical connector blocks and clean corrosive build-up
from the connectors. Lubricate the blocks with dielectric grease and re-
connect. Replace worn or frayed electrical wire and connectors. Be sure
wiring harnesses are properly secured away from sharp edges, steering
linkage, moving parts, and hot exhaust components.
73