Engine Oil; Oil Recommendations; Oil Check - Polaris TRAIL BLAZER 330 Owner's Manual

Polaris atv user manual
Table of Contents

Advertisement

MAINTENANCE

Engine Oil

Always check and change the engine oil at the intervals outlined in the
Periodic Maintenance Chart beginning on page 60. Always change the
oil filter whenever changing oil.

Oil Recommendations

Polaris recommends the use of Polaris PS-4 PLUS Performance
Synthetic 2W-50 4-cycle oil or a similar oil for this engine. Oil may
need to be changed more frequently if Polaris oil is not used. Always
use 2W-50 oil. Follow the manufacturer's recommendations for
ambient temperature operation.
See page 107 for the part numbers of Polaris products.
CAUTION
Mixing brands or using a non-recommended oil may cause
serious engine damage. Always use the recommended oil.
Never substitute or mix oil brands.

Oil Check

The oil fill is located on the left side of the vehicle (1).
1. Position the machine on a level surface.
2. Start the engine and let it idle for 20-30 seconds. Stop the engine.
3. Remove the dipstick and wipe it dry with a clean cloth.
4. Screw the dipstick completely in.
5. Remove the dipstick and read the oil level. Maintain the oil level in
the safe operating range (2). Do not overfill.
2
66
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 trail blazer 330

Table of Contents