Summary of Contents for Oprak OrTR
- Page 1 QUICK REFERENCE MANUAL...
- Page 2 The OrTR includes a Security Application Module (SAM) used to handle encrypted contactless cards and tags. The OrTR is within easy reach of the customer wishing to refuel and transmits the information to the station automation system (OrCU) over an RS-485 shielded cable.
- Page 3 ORPAK Tag Reader (OrTR) Cat No. 817410910 The OrTR has a stylish-look, with a clean panel, which includes two indicators (green and red) and a large LCD. Its operation is very simple: to start a fuel purchase, all the customer has to do is to wave the tag or card in front of the unit.
- Page 4 Controller and for controlling the operation of OrTR. It includes a single cable carrying power and RS485 communication and an optional cable for Ethernet link in the LAN version.
- Page 5 This is a contactless card (see Figure 4) used as a fueling card by the driver at the gas station. When the card is presented next to the OrTR, it reads the card / tag data and transmits it to the station controller in the gas station. Upon verification and approval, the Station Controller activates and releases the pump valve, so fuel can be dispensed to the vehicle.
-
Page 6: Specifications
ORPAK Tag Reader (OrTR) Cat No. 817410910 1.6. SPECIFICATIONS User Interface • LCD- Alphanumeric • Dual-LED green and red indicators • Buzzer • Optional reader for FuelOpass tags • Display Type LCD-16 Characters * 2 lines • Communication Interface RS232 (optional) •... - Page 7 ORPAK Tag Reader (OrTR) Cat No. 817410910 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference and: This device must accept any interference received,...