Use Your Headphones - AUVIO 3301089 User Manual

Turn on the Docking Station
1.
Press On/Off to turn on the docking station. The Power
LED lights green.
2.
Press Source/Pair to toggle Optical and Line In source
mode. The Optical or Line In LED lights respectively.

Use Your Headphones

Select a location that provides the best performance.
1.
Press and hold Power for two seconds to turn on the
headphones. The headphone LED lights blue.
2.
Set the headphone volume to minimum.
3.
Turn on the audio source, and gradually increase the
volume to a comfortable level. The headphones will beep
when the volume is set to maximum.
Notes:
To save energy, the headphones automatically turn off when
securely docked, and will automatically turn on again when
removed from the docking station.
The headphones will automatically turn off if there is no sound
signal, or if the headphones are out of the docking station's
operation range after ten minutes.
Place your docking station away from strong light; avoid pointing it
at a window, where sunlight might prevent optimum reception.
Remove objects between the docking station and headphones.
To preserve battery life, always turn off the headphones when you
are not using them.
Caution: Do not connect the docking station to a speaker output.
Doing so could damage the docking station or the audio source.
7