Polaris Sportsmabn X2 500 EFI Owner's Manual page 48

Passenger Seat
4. Continue lifting the
backrest latch while lowering
the backrest to create the
passenger seat (D).
5. Release the backrest latch
and make sure the under-seat
latch is fully engaged. If
the seat can be lifted, repeat
the procedure until the
under-seat latch engages.
6. Lift the adjustment latch (E)
at the top of the passenger
backrest. Raise the
backrest to the desired position.
Release the latch, making sure it locks into one of the three
operating positions.
NOTE: The backrest must be moved out of the lowest position
before it can be secured in the upright position. The lowest
position is for seat storage only. Do not leave the backrest in
the lowest position. Always adjust the backrest to one of the
three operating positions.
7. Test the passenger seat lock-out by attempting to release the cargo
box dump lever (A). If the dump lever releases, the seat is not
secure. Repeat the set-up procedure.
NOTE: If the lock-out is not working properly, do not allow a
passenger to ride the vehicle. See your Polaris dealer for
service.
8. To return the vehicle to 1-up operation, reverse all steps. Be sure
to lower the passenger backrest to the lowest position before
folding it down into the cargo box. Make sure both backrests lock
securely in place.
FEATURES
D
A
E
45