Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Wildgame V12i7-7
- Page 1 Infrared Digital Scouting Camera User’s Manual Model # V12i7-7...
- Page 2 Includes Adjustable Strap User Manual Camera Unit page 1...
- Page 3 Features RESOLUTION MAX: 12 MP FLASH 27 High Intensity IR LED’s FLASH RANGE up to 75 feet SENSOR Passive Infrared Sensor (PIR) Motion and Heat SENSOR RANGE up to 60 feet IMAGE FORMAT JPEG - Digital Stills/ AVI-Digital Video MEMORY up to 32GB SD Card (not included and required) Class 4 and above recommended...
-
Page 4: Installing Batteries
Installing Batteries Open the door at the bottom of the With the bottom of the camera to- camera by unlatching the locking wards you, Make sure to insert the tab. batteries into the camera with the positive ends towards you where marked positive and the negative ends towards you where marked negative. - Page 5 Close battery compartment cover. Load SD memory card (up to 32GB To latch the cover simply pull the not included) into the SD card slot latch slightly to the left as you close with the connectors facing up. the battery compartment cover. IMPORTANT: Make sure the camera is powered off before removing or installing an SD card.
-
Page 6: Test Mode
Test Mode Power On LCD Ready Mode: The camera will To turn the unit ON press and automatically enter Ready Mode if a release the power button. button is not pressed for greater than 30 seconds. Time/Date Location Still PIR Mode Video PIR Active 24Hr... -
Page 7: Power Save
Power Save Setting Time After 30 seconds without any buttons To change date and time, start by being pushed, the LCD will turn off pressing and release the enter and camera enters into Power Save navigation button to set the hour. or Ready Mode. -
Page 8: Setting Date
Location Setting Date Press the enter navigation but- Save the location of the area the camera was installed. This is for your reference ton after setting the minute to and is optional. If you do not wish to name change the Date. your location skip to the next step. - Page 9 PIR Mode PIR Active Press the enter navigation button Press the enter navigation button while PIR Active is selected. The while PIR Mode is selected. The highlighted option will be blinking. highlighted option will be blinking. Press the + or - navigation but- Press the + or - navigation but- ton to move to different options.
-
Page 10: Pir Sensitivity
Picture PIR Sensitivity Press the enter navigation button Press the enter navigation but- while PIR Sense is selected. The ton while Picture is selected. The highlighted option will be blinking. highlighted option will be blinking. Press the + or - navigation but- Press the + or - navigation but- ton to move to different options. - Page 11 Resolution Delay Press the enter navigation button Press the enter navigation button while Resolution is selected. The while Delay is selected. The high- highlighted option will be blinking. lighted option will be blinking. Press the + or - navigation but- Press the + or - navigation but- ton to move to different options.
-
Page 12: Power Off
Power Off Image Stamp Pictures Display: To turn the unit off, first wake up the LCD screen and then depress and hold the power button until the LCD turns off. Time/Date Location Still Video PIR Mode 24Hr Night PIR Active High Medium PIR Sense... - Page 13 Important Mounting When mounting to a tree, first remove the Once you connect the camera to your computer via the USB cable/ports, the camera will then draw power from clip from one end of the strap so you can the computer. When completing the viewing, transfer- slide the strap through the slots located on ring, copying or deletion of images, please make sure the back of the camera.
- Page 14 Retrieving Images (SD Card in Camera) Method 1: Leave SD card in camera Please select Removable Disk from this A. First, make sure that the camera is pow- menu (or double click on the graphical icon). ered OFF. Next, plug the USB cable into the F.
- Page 15 Retrieving Images (SD Card Reader) Method 2: Remove SD card and use card left of your screen and select “Computer”. reader The summary view will then be illustrated A. First, remove the SD Card from the cam- on the right hand side of the window where era unit itself by pressing on it to where it by the “Devices with Removable Storage”...
- Page 16 Warranty DISCLAIMERS WGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products. WARRANTY For the warranty to be in effect, visit our website and register your product at www.wildgameinnovations.com. Follow the onscreen directions to complete the process.
- Page 17 FCC STATEMENT Product Name: Game Trail Camera Trade Name: Wildgame Innovations Model# V12i7-7 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 18 602 Fountain Parkway Grand Prairie, TX 75050 800.847.8269 “Wildgame Innovations” and the “Button Logo” are trademarks of Wildgame Innovations, LLC.
Need help?
Do you have a question about the V12i7-7 and is the answer not in the manual?
Questions and answers