Throttle Cable; Front Suspension; Driveshaft Bearing - Polaris FST IQ Touring Owner's Manual

MAINTENANCE
Lubrication

Driveshaft Bearing

Fitting
Inject grease into the fitting on the
speedometer sensor housing until
grease purges from the seal on the
inside of the tunnel. This should take
approximately two pumps. Do not
use more than four pumps.

Throttle Cable

Lubricate the throttle cable lightly
with grease or oil. With the
engine off, turn the handlebars to
the left and lubricate liberally as
shown.

Front Suspension

The front suspension and steering components do not require lubrica-
tion.
103