1. Manuals
  2. Brands
  3. Onnet technologies Manuals
  4. Network Router
  5. curro
  6. User manual

Onnet technologies curro User Manual

3g&broadband 11n router
Hide thumbs
Table of Contents

Advertisement

Quick Links

U S E R M A N U A L
w w w . o n n e t t e c h n o l o g i e s . c o m

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the curro and is the answer not in the manual?

Questions and answers

Summary of Contents for Onnet technologies curro

  • Page 1 U S E R M A N U A L w w w . o n n e t t e c h n o l o g i e s . c o m...

  • Page 2: Copyright Statement

    Onnet Technologies (India) Pvt. Ltd Without the express permission of Onnet Technologies (India) Pvt. Ltd, any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages.
  • Page 3 Wireless Anywhere Anytime online "Anywhere Anytime" Onnet 3GR series of 3g enabled routers.

  • Page 4: Table Of Contents

    Table of Content FCC Caution ..................................6 Chapter 1 Introduction..............................7 Overview ..............................9 Features ..............................9 Specifications ............................10 Product Appearance ..........................11 Chapter 2 System and Network Setup........................12 Build Network Connection ........................12 2.1.1 Router Mode ..........................12 2.1.2 AP Mode ............................12 2.1.3 Wi-Fi AP Mode ...........................13 Connecting Onet 3GUSB-4SWRouter ....................13 Network setup ............................14 2.3.1...
  • Page 5 5.1.2 Virtual DMZ ..........................43 Firewall ..............................43 5.2.1 QoS ............................44 5.2.2 Port Filtering..........................45 5.2.3 IP Filtering ..........................46 5.2.4 MAC Filtering ..........................46 5.2.5 URL Filtering ..........................47 Chapter 6 Advanced Setup ............................48 Dynamic DNS Setting ..........................48 Router Wireless Advanced Setup ........................49 6.2.1 Wireless Site Survey ........................50 WiFi-AP 6.2.2 WDS Settings..........................51...

  • Page 6: Fcc Caution

    FCC Caution The device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

  • Page 7: Chapter 1 Introduction

    Chapter-1 Introduction Dear Customer, Thank you for buying another innovative product from Onnet Technologies. We assure you of an unparalleled and exceptional experience with our Onnet product. This product offer the best of both worlds in terms of 3G mobility and high speed multiuser access using 802.11n Wi- fi technology.
  • Page 8 Onnet also intends to offer Green Alternate Energy Technology for us in rural micro telecom environments . Headquartered at Ahmedabad Gujarat, Onnet Technologies aims to make the best of one of the most progressive business environments offered in the country.

  • Page 9: Overview

    Our Solutions Renewable 3G USB stick Energy & 3G Wi-Fi routers Injector / Splitter/X over Solar Power Wi-Fi Outdoor (Hot Spot) POE Switch Indoor LAN Weather Wind Power Networking Station (wireless) Hybrid Outdoor RF Cable Power UPS Wireless Assemblies 1-10 KW Antenna Wind Turbine Surveillance...

  • Page 10: Specifications

    Specifications NETWORK Standards Mobile (External): HSPA/UMTS/EVDO WLAN: IEEE 802.11n, 802.11g, 802.11b WAN: xDSL/Cable Modem Data Rate 3.5G: Up to 7.2Mbps (Support 3G/3.5G/3.75G) WiFi: 802.11n (Max 150Mbps), 802.11g (Max 54Mps), 802.11b (Max 11Mbps) LAN: 802.3/802.3u (10/100Mbps) Frequency Range 2.412~2.484GHz Wireless Security WEP 64 or 128 bit/WPA/WPA2/WPA2 Mixed, WPS (PBC/PIN), WDS, Multiple APs...

  • Page 11: Product Appearance

    Product Appearance • FRONT Antenna Power W W AN WPS Button LED Indicator Status Description: Status Solid Flashing LED Indicator Power Operation OK Green: Reset / Firmware updates in progress Ethernet connected Transmitting Data Ethernet connected Transmitting Data LAN (1~4) Operation OK WIRELESS &...

  • Page 12: Chapter 2 System And Network Setup

    Chapter-2 System and Network Setup The Onnet 3GUSB-4SWRouter is easy to setup and wireless device for various application and environment. It can be used in conference room, hotels, even in transportation. To begin with the Onet 3GUSB 4SW Router, you must have the following minimum system requirements. If your system can’t correspond to the following requirements, you might have some unknown errors on your system.

  • Page 13: Wi-Fi Ap Mode

    2.1.3 Wi-Fi Mode Switch to WiFi AP Mode when you connect to the internet wirelessly through PC and wireless device without wireless LAN function equipped. Switch or Hub 2.2 Connecting Onnet 3GUSB-4SWRouter Prepare the followings before the connection: • PC or Notebook for setup •...

  • Page 14: Network Setup

    Turn ON your computer 2.3 Network setup After the network connection is built, the next step is setup the router with proper network parameters, so it can work properly in your network environment. Before you connect to the wireless router and start configuration procedures, your computer must be able to get an IP address from the wireless router automatically (use dynamic IP address).

  • Page 15: Windows Xp

    2.3.2 Windows XP Click “Start” button (it should be located at lower-left corner of your computer), then click control panel. Double-click Network and Internet Connections icon, click Network Connections, then double-click Local Area Connection, Local Area Connection Status window will appear, and then click “Properties”. Select “Obtain an IP address automatically”...

  • Page 16: Router Ip Address Lookup

    Router IP Address Lookup After the IP address setup is completed, please clicks “start” → “run” at the bottom-lower corner of your desktop: In put "cmd" and then click "OK" Input “ipconfig”, then press “Enter” key. Please check the IP address followed by “Default Gateway” (In this example, the gateway IP address of router is 192.168.1.1) NOTE: If the IP address of Gateway is not displayed, or the address followed by 'IP Address' begins with “169.x.x.x”, please recheck network connection between your computer and router, and / or go to the...

  • Page 18: Chapter 3 Internet Connection

    Chapter-3 Internet Connection This Chapter describes how to setup Onet 3GUSB-4SWRouter to the internet. The Onet 3GUSB-4SWRouter is delivered with the following factory default parameters. Default IP address: 192.168.1.1 (Router Mode) 192.168.1.254 (AP Mode) 192.168.1.254 (WiFi AP Mode) Default IP subnet mask: 255.255.255.0 Web login user name: onnet Web login password:...
  • Page 19 Step 1. Connect iPhone/Smartphone with Onet 3GUSB-4SWRouter via USB cable. Step 2. Select “USB Tethering” as connection type. Step 3. Click on “Done”. Step 4. Wait few seconds for pairing. When WAN LED on, the Internet is ready to access. Note: 1.

  • Page 20: Router Mode- Using As A Broadband Router

    3.2 Router Mode- Using as a broadband router Open a Web browser, and enter http://192.168.1.1 (Default Gateway) into the blank. Enter the User name and Password in to the blank and then Click Login. The default values for User Name and Password are onnet (all in lowercase letters).

  • Page 21: Static Ip

    3.2.1.1 Static IP Select WAN under the IP Config menu, and choose Ethernet Port for the WAN Interface. Its associated setting will show up. Item Description WAN Access Type Select “Static IP” IP Address Enter the IP address which is provided by your ISP. Subnet Mask Please enter the Subnet Mask address Default Gateway...

  • Page 22: Dhcp Client

    3.2.1.2 DHCP Client Select WAN under the IP Config menu, and choose Ethernet Port for the WAN Interface. Its associated setting will show up. Item Description WAN Access Type Select "DHCP Client" Host Name You can keep the default as the host name, or input a specific name if required by your ISP.

  • Page 23: Pppoe

    3.2.1.3 PPPoE Item Description WAN Access Type Select "PPPoE" User Name Input your user name provided by your ISP. If you don’t know, please check with your ISP. Password Input the password provided by your ISP. Service Name Input the service name provided by your ISP. Connection Type Three types for select: Continues, Connect on Demand, and Manual.

  • Page 24: Pptp

    3.2.1.4 PPTP Item Description WAN Access Type Select "PPTP" Server IP Address Input your server IP address provided by your ISP. If you don’t know, please check with your ISP. User Name Input PPTP account provided by your ISP. Password Input the password provided by your ISP.

  • Page 25: L2Tp

    3.2.1.5 L2TP Item Description WAN Access Type Select "PPTP" Server IP Address / Input your server IP address or Host Name provided by your ISP. Host Name If you don’t know, please check with your ISP. User Name Input PPTP account provided by your ISP. Password Input the password provided by your ISP.

  • Page 26: Wan Interface- 3.5G Usb Dongle

    WAN Interface- 3.5G USB dongle 3.2.2 Select WAN under the IP Config menu, and choose 3.5G usb dongle for the WAN Interface. Its associated setting will show as below. Item Description Enter the access point name. If you do not know the setting information for APN, (Access Point Name) check with your 3.5G service provider.

  • Page 27: Wan Interface- Wireless

    3.2.3 WAN Interface- Wireless Select WAN under the IP Config menu, and choose wireless for the WAN Interface. Its associated setting will show as below. Item Description Refresh You can see a list of available Wireless networks. Select the preferred one. Encryption type Select the Encryption type form the drop-down list.

  • Page 28: Ap Mode-Using As A Access Point

    AP Mode-Using as a Access Point Make sure to shift the mode into AP Mode. When this product is used as an access point, the IP address has to be changed. The default IP under AP mode is 192.168.1.254. Open a Web browser, and enter http://192.168.1.254 (Default Gateway) into the blank. Enter the User name and Password in to the blank and then Click Login.
  • Page 29 Item Description IP Address The default IP address is 192.168.1.254 Subnet Mask Enter the Subnet Mask address Default Gateway Enter the Default Gateway address for LAN interfaces DHCP Select DHCP type: Client, Disable, or Server under different environment. DHCP Client Range When enable DHCP server, you can fill in the start and end IP address;...

  • Page 30: Wifi Ap Mode- Using As A Network Converter

    WiFi AP Mode- Using as a Network Converter Ensure to shift the mode into WiFi AP Mode. The default gateway is http://192.168.1.254 and for User Name and Password are onnet (all in lowercase letters). Click Login to enter.
  • Page 31 Item Description IP Address The default IP address is 192.168.1.254 Subnet Mask Enter the Subnet Mask address Default Gateway Enter the Default Gateway address for LAN interfaces DHCP Select DHCP type: Client, Disable, or Server under different environment. DHCP Client Range When enable DHCP server, you can fill in the start and end IP address;...

  • Page 32: Chapter 4 Wireless Setup

    Chapter-4 Wireless Setup Wireless Setup There are two ways to setup wireless LAN with Onet 3GUSB-4SWRouter. You can use either way to setup Wireless LAN. 4.1.1 Setup Wireless LAN by WPS button You can setup wireless LAN easily by using the WPS button if both WLAN router and the WLAN adapter (client) are WPS supported.
  • Page 33 The utility will start searching the destination connection. Confirm the information form the Utility After completing the WPS setup. Please confirm that it can be connected to the Internet. Note: The setup image might be some differences when using other branded Adapter.

  • Page 34: Wireless Basic Setup From Web Gui

    4.1.2 Wireless Basic Setup from Web GUI The Wireless Basic Settings include Band, Mode, SSID, Channel Number and other wireless settings. Item Description Disable Wireless LAN Interface Turn off the wireless service. Band Select the frequency. It has 6 options: 2.4 GHz (B/G/N/B+G/G+N/B+G+N). Mode Select the mode.

  • Page 35: Multiple Aps

    4.1.2.1 Multiple APs The Onet 3GUSB-4SWRouter can register up to 4 SSIDs (wireless LAN group). It can be used as if there are multiple wireless LAN access points with one product. Each SSID could be set with different data rate, WMM and access type.

  • Page 36: Enable Universal Repeater Mode

    4.1.2.2 Enable Universal Repeater Mode The router can act as Station and AP at the same time. It can use Station function to connect to a Root AP and use AP function to service all wireless stations within its coverage. Example: When users enable the Universal Repeater to connect to the upper level device, please fill in the upper level device‟...
  • Page 37 (Please disable the DHCP service first) Users can use the Network Configuration page to check the information about “Wireless Repeater Interface Configuration”.

  • Page 38: Wireless Security Setup

    Wireless Security Setup Here users define the security type and level of the wireless network. Selecting different methods provides different levels of security. Please note that using any encryption may cause a significant degradation of data throughput on the wireless link. There are five Encryption types supported: “None”, “WEP”, “WPA (TKIP)”, ”WPA2(AES)”, and “WPA2 Mixed”.
  • Page 39 Encryption- WPA (WPA, WPA2, and WPA2 Mixed), WPA Authentication Mode (1) Enterprise (RADIUS): Please fill in the RADIUS server Port, IP Address, and Password (2) Personal (Pre-Shared Key): Pre-Shared Key type is ASCII Code; the length is between 8 to 63 characters. If the key type is Hex, the key length is 64 characters.

  • Page 40: Wireless Access Control

    Wireless Access Control Access Control allows user to block or allow wireless clients to access this router. Users can select the access control mode, then add a new MAC address with a simple comment and click on “Apply Change” to save the new addition.
  • Page 41 (2) The MAC address what you set will be displayed on the Current Access Control List. (3) The wireless client will be denied by the wireless router.

  • Page 42: Chapter 5 Router Mode Security Setup

    Chapter-5 Router Mode Security Setup This section contains configurations for the Onet 3GUSB-4SWRouter's advanced functions such as: virtual server, DMZ, and Firewall to provide your network under a security environment. 5.1.1 Virtual Server The Virtual Server feature allows users to create Virtual Servers by re-directing a particular range of service port numbers (from the WAN port) to a particular LAN IP address.

  • Page 43: Virtual Dmz

    Please find the following figure to know that what the virtual server is configured as. The web server is located on 192.168.1.100, forwarding port is 80, and type is TCP+UDP. 5.1.2 Virtual DMZ The DMZ feature allows one local user to be exposed to the Internet for special-purpose applications like Internet gaming or videoconferencing.

  • Page 44: Qos

    5.2.1 The QoS can let you classify Internet application traffic by source/destination IP address and port number. To assign priority for each type of application and reserve bandwidth can let you have a better performance in using critical real time services like Internet phone, video conference …etc. Item Description Enable QoS...

  • Page 45: Port Filtering

    QoS Rule Advance Setting: Address Type Set QoS by IP Address or MAC address Mode Select Guaranteed minimum bandwidth or Restricted maximum bandwidth Key in the bandwidth. Bandwidth Comment Write your comment here. Click on Apply Changes to save the setting data. Or you may click on Apply Changes &...

  • Page 46: Ip Filtering

    5.2.3 IP Filtering When enabled, LAN clients are blocked / filtered from accessing the Internet based on their IP addresses. Item Description Enable IP Filtering Please select Enable IP Filtering to filter IP addresses. Local IP Address Please enter the IP address that needs to be filtered. Protocol Please select the protocol type of the IP address Comment...

  • Page 47: Url Filtering

    Item Description Enable MAC Filtering Please select Enable MAC Filtering to filter MAC addresses. MAC Address Please enter the MAC address that needs to be filtered. Comment You can add comments for this regulation. Apply Changes & Reset Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data.

  • Page 48: Chapter 6 Advanced Setup

    Chapter-6 Advanced Setup You can find advanced settings in this section. Router Mode only. Router AP Mode only. WiFi AP Mode only. WiFi-AP Dynamic DNS Setting Router You can assign a fixed host and domain name to a dynamic Internet IP address. Each time the router boots up, it will re-register its domain-name-to-IP-address mapping with the DDNS service provider.

  • Page 49: Wireless Advanced Setup

    Please enter Domain Name, User Name/Email, and Password/Key. After entering, click on Apply Changes to save the setting, or you may click on Reset to clear all the input data. Item Description Enable/Disable DDNS Select enable to use DDNS function. Each time your IP address to WAN is changed, and the information will be updated to DDNS service provider automatically.

  • Page 50: Wireless Site Survey

    Item Description Fragment Threshold To identify the maxima length of packet, the over length packet will be fragmentized. The allowed range is 256-2346, and default length is 2346. RTS Threshold This value should remain at its default setting of 2347. The range is 0~2347. Should you encounter inconsistent data flow, only minor modifications are recommended.

  • Page 51: Wds Settings

    6.2.2 WDS Settings Router When selected in the Basic Settings page and enabled here, Wireless Distribution System (WDS) enables the router to be used as a wireless bridge. Two Wireless-N Routers in bridge mode can communicate with each other through their wireless interfaces. To accomplish this, all wireless routers should be set to the same channel and the MAC address of other AP / Routers should be entered in the table.
  • Page 52 Set the connection mode to “AP+WDS” from “Wireless Basic Setting”, and then select the channel number (in this example is "6”). Click Apply Changes to save the setting. Enable WDS function from the page – “WDS Setting”, and then fill in the MAC address of Router B. Click Apply Changes to save the setting data.
  • Page 53 The WDS AP List will show the WDS device MAC address after reboot. Move on the setup to WDS Router B...
  • Page 54 You will receive an IP address from Router A. If you failed the WDS setting, please check you setting with refer to the list below. Mode Router A Router B LAN IP Address Router Security Set the same segment as the router B(Note 1) Set the same segment as the router A(Note 1) Example :192.168.1.1 Example :192.168.1.2...

  • Page 55: Wps

    6.2.3 Router This page allows user to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could let your wireless client automatically synchronize it’s setting and connect to the Access Point in a minute without any hassle. 3.5G Mimi Router could support both Self-PIN or PBC modes, or use the WPS button (at real panel) to easy enable the WPS function.

  • Page 56: System Management

    (3). Click PIN from Adapter Utility to complete the WPS process with the wireless router. Start PBC: (1). Press the WPS button (A) from Onet 3GUSB-4SWRouter and wait for Wireless/WPS LED light (B) changed into orange. (2). Press the WPS button (C) from the adapter until the setup window shows up.

  • Page 57: Change Password

    6.3.1 Change Password Users can set or change user name and password used for accessing the web management interface in this section. Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the input data. 6.3.2 Firmware Upgrade This function can upgrade the firmware of the router.

  • Page 58: Profile Save

    6.3.3 Profile Save Users can create a backup file that contains current router settings. This backup file can be used to restore router settings. This is especially useful in the event you need to reset the router to its default settings. Save Configuration (1).
  • Page 59 (3). Click Upload to upload configuration file to Onet 3GUSB-4SWRouter. (4). After 90 seconds, Onet 3GUSB-4SWRouter will reboot automatically. Reload factory default setting (1). Please click Reset (2). Please click OK to start reload factory default setting to Onet 3GUSB-4SWRouter. (3).

  • Page 60: Time Zone Setting

    6.3.4 Time Zone Setting Users can synchronize the local clock on the router to an available NTP server (optional). To complete this setting, enable NTP client update and select the correct Time Zone. Item Description Current Time Users can input the time manually. Time Zone Select Please select the time zone.

  • Page 61: Language Setting

    6.3.6 Language Setting The Onet 3GUSB-4SWRouter provide 12 language for Web GUI. You can select the LANGUAGE interface from the dropdown list and by following steps. When you see the screen message change to the selected language, the setup is completed. Log &...

  • Page 62: Event Log

    6.4.2 Event Log You may enable the event log feature here. Item Description Enable Log You may choose to enable Event Log or not. System all, Wireless, & DoS Please select the event you want to record. Enable Remote Log You may choose to enable the remote event log or not.

  • Page 63: Chapter 7 Ddns Service Application

    Chapter-7 DDNS Service Application DDNS is a service that changes the dynamic IP to a static IP. Setting a DDNS can solve the problem of multiple IP addresses alloted by different ISP every time. After setting the Router, your host name would correspond to your dynamic IP.
  • Page 64 After you have this “account created message”, check your mailbox. You will receive a mail from DynDNS website. Click on the indicated address within your mail to confirm. Click on login. Click My Services after logging in.
  • Page 65 Click Add New Hostname. Put in your favorite hostname and service type, and then click Create Host after finished. Your hostname has been created when you see the following page.

  • Page 66: Chapter 8 Q & A

    Chapter-8 Q & A 8.1 Installation Q: Where is the XDSL Router installed on the network? A: In a typical environment, the Router is installed between the XDSL line and the LAN. Plug the XDSL Router into the XDSL line on the wall and Ethernet port on the Hub (switch or computer). Q: Why does the throughput seem slow? A: To achieve maximum throughput, verify that your cable doesn’t exceed 100 meter.

  • Page 67: Os Setting

    OS Setting Why can't my computer work online after connecting to Onet 3GUSB-4SWRouter? A: It's possible that your Internet protocol (TCP/IP) was set to use the following IP address. Please do as the following steps. (Windows 2000 & XP) Start＞ Settings＞ Network and Dial-up Connections＞ double click on Internet Protocol(TCP/IP)＞...

  • Page 68: Onet 3Gusb-4Swrouter Setup

    Q: Web page hangs, corrupt downloads, or nothing but junk characters is being displayed on the screen. What do I need to do? A: Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-negotiate" feature of your NIC as a temporary measure.

  • Page 69: Wireless Lan

    Q: Why is that I can ping to outside hosts, but cannot access Internet websites? A: Check the DNS server settings on your PC. You should get the DNS servers settings from your ISP. If your PC is running a DHCP client, remove any DNS IP address setting. As the router assign the DNS settings to the DHCP- client-enabled PC.
  • Page 70 Q: My PC can’t locate the Wireless Access Point. A: Check the following: • Your PC is set to Infrastructure Mode. (Access Points are always in Infrastructure Mode.) • The SSID on your PC and the Wireless Access Point are the same. Remember that the SSID is case-sensitive. So, for example “Workgroup”...

  • Page 71: Support

    8.7 Support Q: Why can’t the NTFS hard disk be used with Onet 3GUSB-4SWRouter? A: Onet 3GUSB-4SWRouter doesn’t support the NTFS hard disk. It only supports EXT3 and FAT32 file systems. Q: Why can’t my USB devices work on Onet 3GUSB-4SWRouter? A: Maybe your USB devices and Onet 3GUSB-4SWRouter are not compatible.

  • Page 72: Chapter 9 Appendices

    Chapter-8 Appendices Operating Systems Microsoft：Windows 2000, XP, Vista, Windows 7. Apple：Mac OS X 10.4.7, Leopard and the following related versions. Linux：Redhat 9, Fedora 6 & 7, Ubuntu 7.04 and the following related versions. Browsers Internet Explorer ver. 6 and 7 and the following related versions. FireFox ver.
  • Page 73 Warranty Clause: Onnet Technologies India Private Ltd Terms & Conditions of Warranty Definitions :Unless the context otherwise requires, the following terms would have the prescribed meanings: OTPL : Onnet Technolgies India Private Limited, a company duly registered under the Companies Act having its Registered Office at FF3, Mardia Plaza,CG Road,Ahmedabad, 380006, Gujarat, India.
  • Page 74 • The warranty does not cover the replacement of the product(s). • Warranty does not cover warranty of functionality of the Product(s) • Warranty does not cover damage caused due to act of God & force majeure events including but not limited to fire or water damage, electrical disturbances etc.

Table of Contents