GETTING STARTED 1.1 About your TELPAD 2 TELPAD INTRODUCTION 2.1 Getting to know your TELPAD 2.2 Product Speci cation 2.3 Installation 2.3.1Basic Connection 2.3.2Installing the dock battery 2.3.3Docking and undocking the Tablet 3 TABLET FUNCTIONS 3.1 Turning the Tablet ON or OFF 3.1.1 Turning the Tablet ON...
Page 3
3.8 Opening and switching applications 3.9 Accessing the Settings 3.10 Languages & input method & account setting 3.11 Setting the date and time 3.11.1To automatically set date and time 3.11.2 To manually set date and time 3.12 Installing or removing the microSD card 3.13 Connecting or disconnecting from a computer using USB 3.14 Connecting the Tablet to a TV 3.15 Wireless networks...
Page 4
4.1.3 Ending a call 4.1.4 Selecting area code 4.1.5 Favorites 4.1.6 Memo 4.1.7 Importing/exporting contacts 4.1.8 Changing ringtones 4.1.9 Contacts 5 BASIC TROUBLESHOOTING FOR THE TELPAD 5.1 Tablet not powering up 5.2 No dial tone 5.3 Distorted audio on speaker...
Page 5
5.4 Tablet Dialler cannot make a call 5.5 No audio response in the Handset 6 FAQs 7 WARNINGS AND PRECAUTIONS 8 PERSONAL INFORMATION AND DATA SECURITY 9 LEGAL NOTICE 10 DISCLAIMER OF WARRANTIES 11 INDEX...
1.1 About your TELPAD The TELPAD is the world’s rst landline, broadband, and tablet in one—a device that not only gives you access to basic communication services, but also brings to your home a world of productivity and entertainment. The TELPAD is powered by Android, the world’s leader in smartphone technology.
2.1 Getting to know your TELPAD Microphone(tablet) Mini HDMI Port USB Port Earphone Jack IR1(transmit) Front Camera IR2(transmit and receive) Volume Down Button Volume UP Button Power Button Tablet Receiver Proximity sensor Light sensor Rear Camera Rear Camera Flash IR3(transmit)
Page 10
Telephone Receiver/Handset 22 23 Speaker(Phone Set) Flash key Pause key Redial key Hands Free key Indicator(Charging/Incoming Calls) Phone Cord Jack Numeric keypad Ringtones Volume Direct Current Input Jack Extension Cord Jack Landline Jack 29 30 31 32...
Page 11
Accessories USB Charger HDMI Converter USB Power Cable DC4.0 Phone Line Coiled Phone Cord USB Data Cable Battery...
2.2 Product Speci ciation GENERAL SPECIFICATIONS AND DISPLAY DIMENSION 189mm x 115 mm x 11 mm DISPLAY AND RESOLUTION 7 Inch IPS (1024X600) SYSTEM SOFTWARE Android™ 4.4.4 AIR INTERFACE Wi-Fi - 802.11b/g/n MULTI-TOUCH PANEL Capacitive 5-Points-Touch PRIMARY KEYPAD 3 Standard Soft Keys: Home, Back, Recent Applications DISPLAY COLOR DEPTH 24-bit CONNECTIVITY...
Page 13
SMART DIALER Call Hold Speed Dial PSTN Speaker Volume Adjustment COMMUNICATION AND ORGANIZER Protocols: SMTP, POP3 and IMAP4 EMAIL Supports Exchange Calendar, Contacts synchronous MEDIA PERFORMANCE VIDEO DECODING 3GPP2, 3GPP, RMV, TS, 3GP, VOB, AVI, MP4, FLV, WMV, MKV AUDIO DECODING AAC, AMR, APE, FLAC, MID, MP3, OGG, WAV, WMA PICTURE FORMATS JPEG, JPG, BMP, PNG...
HOME CONNECT AND CONTROL Cast Screen Built-in wi display application DLNA Built-in eHomeMediaCenter application infrareduniversal remote,Reservation, Home control Outside Home Control, motion detection Body Temperature Monitor,Family Temperature Manager, Home Care Menstrual Cycle,Fertility State...
2.3 Installation 2.3.1 Basic Installation Before installing or removing the adapter, telephone line or the dock battery, ensure the tablet is o the dock. USB charger USB Power Cable DC4.0...
2.3.2 Installing the dock battery 2.3.3 Docking and undocking the Tablet 1. Removing the back cover To install the tablet on to the dock, refer to To remove the back cover, the following gure. refer to the following gure. 2. Installing the battery To remove the tablet from the dock, do as shown To install the battery, in this gure.
3.1 Turning the Tablet ON or OFF Turning the Tablet ON 3.1.1 Before you turn on your tablet. ensure that the battery is correctly installed or the Tablet is properly connected to the power supply. To turn on your tablet, press the Power key. Turning the Tablet OFF 3.1.2 1.
3.2 Charging the battery 3.2.1 Charging the tablet battery The Tablet is powered by a rechargeable Li-ion battery. There are two ways to charge the Tablet: 1. Place the Tablet on the dock with the power cord supplying power to the dock. 2.
3.3 Working with the keys 3.3.1 Using the physical keys Power Press and hold to power the Tablet on or o . Press shortly to lock/unlock the screen. When the Tablet is ringing, press any of the volume buttons if you want to mute the ringer. On the Home screen, press to increase of decrease the ringtone volume, or set the Tablet to silent mode.
3.4 Using the touch screen Touch By touching an item, you can select the item or launch it. For example: Touch the on-screen keyboard to insert text and/or characters. Touch an application icon to launch it. Touch and Hold Touching and holding items will activate them. For example: Touch and hold an application/widget to move it.
3.5 Home screen The Home screen is the starting point in using the Tablet Touch the Home key to display the Home screen. You can customize the Home screen with various wallpapers and create shortcuts for items you want to easily access. 3.5.1 Getting to know the Home screen 1.
Main display area: This area displays application shortcuts, widgets, and other items that can be easily accessed by touching them. Weather Widgets: The weather widget informs you of the time, date, and weather in your location. It can be customized based on your preference. Short Cut Buttons: These are shortcuts for various applications.
3.6 Locking and unlocking the screen 3.6.1 Locking the screen When the Tablet is powered on, press the Power key and the screen will turn o and lock. When the Tablet is left idle for a speci ed time period that you have set, the screen will automatically turn o and lock.
3.7 Inputting text You can enter and edit text in text elds and use menu commands to cut, copy, and paste text within or across applications. 3.7.1 Entering text using the onscreen keyboard To open the onscreen keyboard, touch a text eld where you want to enter text. To switch the input method, touch the icon located at the lower right corner of the keyboard.
3.7.2 Cutting or copying text To quickly cut or copy all the text in a text eld: 3.7.2.1 Touch and open the text eld that contains the text that you want to cut or copy. 3.7.2.2 Touch and hold the text eld to display the Edit text menu. 3.7.2.3 Touch Select all, Cut all, or Copy all.
3.8 Opening and switching applications To open an application, touch the shortcut on the Home screen, or go to the Applications screen by touching the Application button on the Home screen . To open and switch to a recently used application, touch the at the lower left corner of the touchscreen.
3.11 Setting the date and time 3.11.1 Automatically set date and time 1. Open the Settings list. 2. Touch Date & time. 3. Check the box for Automatic date & time. 4. Touch Select time zone, then scroll down and select the correct time zone from the list. 5.
3.12 Installing or removing the micro SD card Insert your micro SD card into the micro SD card slot until it clicks into position as shown in the following gure. Micro SD card slot Remove the micro SD card by gently pushing the card further into the slot, and then release it. The card will eject from the slot, and can be removed.
3.13 Connecting to or disconnecting from computer using USB 3.13.1 Connecting the Tablet to a computer using USB cable: USB Micro port USB power cable 1. Use the appropriate USB cable (micro USB connector) to connect the Tablet to a USB port on your computer. Once it is properly connected, the Tablet displays a noti cation indicating that the USB is connected.
TV, using a High-De nition Multimedia Interface (HDMI) cable. The HDMI cable is an optional accessory that’s not included with your TELPAD. When purchasing an HDMI cable, please HDMI check the connector type of the cable.
3.15 Wireless networks The tablet is able to connect to various wireless networks and devices. Including Wi-Fi data networks, and Bluetooth devices such as headsets for voice and data transmission. Wi-Fi Wi-Fi is a wireless networking technology. Wi-Fi technology can provide wireless Internet connection over distances of up to 100 meters, however the connectivity of the Wi-Fi depends on the Wi-Fi router, and the surrounding environment in which it operates.
3.15.3 Connecting to a Wi-Fi network When the Wi-Fi is turned on, the device searches for available networks accessible within range. Inside Settings, when the Wi-Fi is turned on, the available networks will be listed on the side. Select the network you would like to connect to. If the network is open, it will automatically connect as soon as you select it.
3.16 Bluetooth Bluetooth is a wireless communications technology for exchanging information over short distances. The connectivity between the Bluetooth devices may be a ected by their surroundings and is altered or reduced by obstacles such as walls or other electronic devices. 3.16.1 Opening Bluetooth settings To con gure the Bluetooth settings of the tablet in the Bluetooth settings list: Touch and open the Settings from the Home screen or Applications screen...
3.16.4 Connecting to Bluetooth devices Pairing with a Bluetooth device Search for a Bluetooth device, pair with it, and exchange information between devices. Open the Settings Under Wireless & Network touch Bluetooth. Touch the name of your device to make it visible to nearby devices. Touch Search for devices at top to begin or reinitiate search for other devices.
3.17 GOOGLE SERVICES 3.17.1 Creating a Google Account When accessing a Google service for the rst time with your device, you will be asked to sign in using your Google account. Make sure the Tablet is connected to a network to sign in or create a Google account. If you already have a Google account, simply enter your information and sign in.
3.17.2 Using the Play Store You can access thousands of easily downloadable applications and games for your Tablet via the Google Play Store. 3.17.3 Searching for Applications There are several ways to search for applications in the Play Store, through: 1.
3.17.5 Uninstalling an Application 1. Go to Play Store, touch the My apps button. 2. Touch the application to uninstall, and then touch Uninstall. 3. When asked for con rmation, touch OK to remove the application from your Tablet. 3.17.6 Backing up and restoring apps and settings from a Google account 1.
3.18.2 Adding and deleting e-mail accounts Adding an e-mail account The rst time you open E-mail, you are prompted to set up an e-mail account. If you have an existing e-mail account, you can add this by touching Add account. Automatic setup: 1.
Page 41
3.18.3 Gmail Gmail is an e-mail service provided by Google. Gmail can be accessed from the Applications screen by touching the Gmail icon. To add a Gmail account: 1. After opening Gmail, touch Add existing. 2. Enter the e-mail address and password of your Gmail account. 3.
3.19 Camera Instructions Take picture or make video: nd and tap “camera” icon on tablet, keep lens cap clean and rub it by a clean cloth before shooting, any stain on it will cause photo bad exposure or blurring. 1. Launch camera in application program, tap blue button to capture picture, swipe left on the screen to view photo album, swipe right on the screen to access photo taking mode.(Figure one);...
Page 43
2 . Tap the icon above blue button, there will display three icons on the screen. Their order from left to right respectively are “more options” , “ ash mode” and “front and rear camera switching mode”. “More options” includes settings of “location”, “countdown timer”, “picture size”, “white balance”, “cloudy”...
Page 44
3 . Tap camera icon below blue button, there will display another three icons on the screen. Their order from left to right respectively are “panoramic photo mode”, “video mode” and “photo mode”. (Figure 5) Panorama Mode Photo mode Video Figure 5...
Camera direction and power supply for the TELPAD. The power stability of TELPAD should be considered if TELPAD is used continuously for a long time and also the user can set TELPAD in "stay awake mode" to keep the Home control running. User has to verify the software con guration like IR signals, Internet connection, and personal use case.
Page 46
Reservation, (3) Out Home Control and (4) motion detection. TELPAD Home control will work with the devices that are already in your home. It can control your TV, Cable Box, Radio, DVD, DVR, VCR, Blu-Ray, CD, Audio, Air Con (A/C), Ampli er and Satellite and much more.
If the model name is incorrect or leaved blank, it will show all available code for the brand. **When con rm signals, please point the Red part of TELPAD towards the device you are trying to control just like a standard remote control.
-Please point your original remote controller with the Red part of TELPAD like right picture. And follow on-screen instructions to con gure the device. -Please check if your device is working just like original remote controller with “Test” button. If not, please tap “Learn”...
3.20.4 Reservation Setup - Reservation is just like Alarm App. The di erence is we have to assign a IR signal rather than a melody. Please install required IR signal with “IR Universal remote Initial Con guration” process before reservation setup. - From the main menu tap “Reservation Setup”...
You can control your home device like air-conditioner or IR controllable light system with your android mobile from Anywhere with your 3G or WIFI connection. If you want check the result, TELPAD can be provided for remote camera for home monitoring.
Page 51
-From the main menu tap “Remote Setup” tap “Connect with Mobile” -Download & install “Home Control Client” in the mobile if not installed. (URL will be given in TELPAD on-screen instruction, Input it in mobile Browser) Execute “Home Control Client”...
Page 52
“Remote Name” tap required signal. -From the main menu in your “Home Control Client” tap “Capture” for request TELPAD Camera still image. -Please follow on-screen instructions and wait for seconds until a still image pop-up. - See the image and Tap <Back> key to return to main menu.
- The motion detection feature will send NOTIFICATIONS to user’s mobile devices(only registered/paired devices via Bluetooth will receive noti cations).Once motion is detected by the TELPAD’s IR sensors, the TELPAD’s camera will take photos, then send noti cations such: Motion has been detected! See images. The user must be connected to the internet to receive these noti cations.
Page 54
- From the main menu in TELPAD, please tap “Motion Detection” and follow on-screen instructions. The noti cation will be forwarded to connected mobile once started. If TELPAD camera faces continuous change, it will not send all of the pictures. (Send 1 noti cation per about 30 seconds).
Terms of Use The Home Care apps utilize various health related date you enter. Your data are stored and accessed by TELPAD Home Care only and are not transferred to or stored on any servers. The calculated forecasts of Home Care may not be accurate and should not be used to prevent unwanted pregnancy.
Page 56
Appendix 2. Register ltem Description ID _Input Input User ID Gender male/female birthday_Input Input Birthday Height Input height E-mail_Input Input E-mail password_Input Input User password password_Check Input User password for con rmation Figure2...
Page 57
Figure3 Figure 4 Turn on bluetooth body scale and bare your feet on the middle of it. At this moment, tablet will pop up a Bluetooth notice , select “Allow” to start “Bluetooth” on tablet. (Figure5and6)
Page 58
When Bluetooth body scale and tablet paired with each other successfully, there will have a screen message about “new data save or not” on TELPAD. Tap “Yes” to review your body index and tap “No” to reject new body index data from Bluetooth body...
Figure7 Figure8 3.21.2 iFever Manage User Guide 1. Click “ Switch thermometer “ on the top left corner in weight measurement interface, it will switch to temperature measurement interface. (Figure9)
Page 60
Figure9 This section contains a description of Home Care application which is working with ‘iFever manager” dongle. iFever Manager enable your TELPAD for body temperature measurement. You can keep history of your family temperature for a long time. If your baby gets a fever, you can show doctor with the daily graph screenshot. (Show body temperature variation based on time axis) If you are woman, TELPAD monthly view can help you to keep track of your fertility/menstrual cycles.
Page 61
With Monthly view, you can monitoring your average body temperature and keep your body healthy. Average body temperature of a healthy adult is 36.50-36.80°C. But, average daytime body temperature of a healthy adult is above 37°C. Cancer patients have low body temperature, usually less than 36°C. 2.
Page 62
3. Tap the Start button or volume up hard key to begin temperature measurement. 4. Please move your iFever Manager sensor part to close your (or others) forehead position during three seconds. Measured distance is within 1 cm.(Figure12) 5. Please see the measured value, and tap the save button to store the data. Tap Clear button to clear last measured value if needed.
Page 63
Appendix 3. Daily Graph Figure14 Figure15 ltem Description Last month button Move to previous month Calendar Display current date Next month button Move to next month No measured If no measured date, will be displayed with pale sky blue Today Today is Green background Selected date This date can be selected when user touched...
Page 64
* If Basel body temperature option is not ON in the Setting menu, No 7, 8, 9 menus will not be displayed, and if user selects a date it will show Graph View. ltem Description Last month button Move to previous month Calendar title Display current date Next month button...
Page 65
Appendix 4. Monthly Graph Figure18 ltem Description Start menstruation First day of menstruation (Marked in Daily graph) Graph Show graph with temperature Made love Made love date( Marked in Daily graph) Y axis Date for the month Non-Childbearing Indicate non Childbearing period Childbearing period Indicate Childbearing period Menstrual period...
Page 66
Appendix 5. Setting Figure18 ltem Description 1 Version Can check APK version; Edit Pro le To edit your account les agai Sign out To “keep” or “logout” current user; Default Application Select and access default “Thermometer” or “Weight scale”; Basal body temperature Select “on”...
Page 67
Appendix 6. Basal body temperature Basal body temperature (BBT) is our lowest temperature during rest, which is usually during the time we're sleeping. This is the reason why BBT should be taken before getting out of bed for accurate fertility charting. Ovulation causes one half to one-degree rise in BBT, so monitoring BBT helps provide information on the best time for conception.
3.22 Cast Screen Function Operation Guide 1. Connect wireless transmission equipment ”HDMI Dongle” to the HDMI port of displayer or TV, and plug in 5V power supply. 2. Set displayer or TV in “ HDMI” mode and HDMI Dongle in mode of “Miracast” . 3.
Page 69
4. And then press “Cast screen” same as gure two below. Figure 1. 2...
Page 70
5. Select “Enable wireless display” in menu of top right corner;( Figure three and four) Figure 1.3 Figure 1.4...
Page 71
6. Tablet will search the accessible signal sources in range automatically;(Figure ve) Figure 1.5...
Page 72
7. Select the corresponding signal source and wireless connection shows successfully.(Figure 6) Figure 1.5...
3.23 DLNA 3.23.1 DLNA introduction The full name of DLNA is DIGITAL LIVING NETWORK ALLIANCE. The purpose is to enjoy your music, photos and videos anywhere anytime. DLNA is initiated by SONY, Intel and Microsoft. It aims at resolving interconnection and interworking of wireless and wired network for personal PC, consumer electronics, mobile devices.
3.23.3 Control device discovery and connection Our MA7 can support DLNA and you can operate as below: Please use mobile phone as source port and ensure the version of the android must be 2.3 and above(because only version 2.3 of android can support miracast) such as Google device.
Page 75
2. Start Application -Please start “eHomeMediaCenter” in MA7 tablet and click “Settings” to change your device name for easy identi cation . Such as “ MA7”. Figure1.3 click settings Figure1.4 Change device name...
Page 76
Figure1.5 nish - Please start “apk-iMediaShare” and the interface Figure1.6. Figure1.6 apk-iMediaShare interface...
3.23.4 The brief introduction of interactions between tablet and mobile phone. To push local video, music or photos on your mobile phone to display on tablet. Please refer to picture 1.6 “GALLERY VIDEOS”、“GALLERY PHOTOS” and“GALLERY MUSIC”. For example, click “Gallery Music” as the gure 1.7 below, you will see the local les on your mobile phone(the les in red box).
Page 78
1.8 interface Figure 1.9 Open “choose a screen” Figure 1.8 Music Playing Interface and click, the following gure 1.9 will pop-up.
Page 79
Please choose “ MA7 ” in above gure ,the music on both mobile phone and tablet will play at the same time. But only MA7 tablet have music voice and your mobile phone can return and operate other function once above operation nished.
Page 80
Figure1.12“iMediaShare”interface Click”FREEMUSICCLIPS” Access” ipps”interface. If it’s srt time for you to operate and there is no ipps APP in your mobile phone, the “ ipps” link will be given in the on-sreen interface and you can follow the instructions to download and install. Figure.1.13 ipps APP interface Click “...
Page 81
Click“Log in”as the following gure Figure.1.15 account log in interface You no need to login facebook account, click “done” on top right corner in the above gure, then click back key to access the following gure interface. Figure.1.16 ipps APP main menu interface...
Page 82
Choose and open any project in above gure, click “STAFF PICKS” as an example and gure below. Figure.1.17 start“STAFF PICKS” Choose and play any video in the above interface, “Robochop” as an example. Figure.1.18 start “Robochop”...
Page 83
Click ”choose a screen” at top right corner in above gure and choose “ MA7 ”, the live video on mobile phone will be pushed to play on MA7 tablet. Figure.1.19 Playing interface on mobile phone Figure.1.20 Playing interface on MA7 tablet Remark: 1 .
Page 84
Mobile phone can share the music and video on MA7 tablet. Please start “apk-iMediaShare” on mobile phone, and start “eHomeMediaCenter”in MA7 tablet “Media Player”interface. Figure1.21 start Media Figure1.22 start When you start “Media Player” and the interface will show shared music, video and photos. You can click the les which you...
Page 85
MA7 tablet can share local music, video or pictures to mobile phone. Please start the “Media server” in “eHomeMediaCenter”interface on MA7 tablet when apk-iMediaShar is started on mobile phone. Figure1.23 Start Media server Figure1.24 click top corner “Add Share”...
Page 86
Figure1.25 click“OK” Figure1.26 select top right corner“start Figure1.27 the shared les from MA7 tablet...
4.1 VOICE SERVICES The touchscreen Dialer can be accessed by touching the Dialer shortcut. The Dialer is automatically launched when the Tablet is placed on the dock. When the Tablet’s dock interface comes into contact with the dock connector, the keypad on the dock is automatically disabled. With this set-up, you must use the Tablet dialer to make calls.
4.1.1.4 Switching from handset to speakerphone and vice versa 1. Touch to switch from handset call to speakerphone. 2. To return to using the handset, lift the handset. The call will be continued via handset. Only one of the two modes will be active at a time. To end a call, please make sure both the handset and Tablet is o -hook 4.1.1.5 Making a call from the Contacts 1.
When the area you are in has been selected, the phone will automatically recognize the similar area code for all incoming and outgoing calls, and will display the phone number without the area code. You will also be able to direct dial the phone number within the same area.
4.1.8 Changing ringtones Within the Dialer, touch the Phone Setting tab. Touch the Ringtones & Volume from the list Touch the Menu button at the top corner. Touch Settings in the menu displayed. From the options that shows up touch Phone ringtone. Select the ringtone you would like from the list provided.
Page 92
4. Once you have nished entering details, ick to the bottom of the page and touch Done to save the contact details to your Tablet. While viewing the Call log, touch and hold the call log list to show contact details. You can add numbers to the contacts via the virtual screen.
5.1 Tablet not powering up 5.1.1. Press Tablet power key and check whether the PLDT TELPAD logo appears upon initialization. 5.1.2. If the Android™ Tablet doesn’t launch, connect the Tablet to the power supply through the dock. 5.1.3. If the problem still exists, please contact the PLDT Business o ce.
Page 96
Secondly, You must install imediashare(to access video/photos in your gallery) and ipps TV(to access video streaming) applications available in Play store/App store. 2. The music, pictures or video les in MA7 tablet can’t be shared on Mobile phone once DLNA connected.
Page 97
Cause: It may be caused by the poor contact between Dock Phone and Tablet. TELPAD can’t work when tablet Solution: First check if there is obvious obstruction/blockage then try cleaning the pins using is inserted into dock phone. an clean cloth or brush to remove dust.
Page 98
Cause: TELPAD may be on standby mode or TELPAD is locked. Unresponsive TELPAD’s touch panel. Solution: Unlock the TELPAD in case is still unresponsive try to restart the TELPAD. Cause: It may be caused by the low battery of tablet or the power key has been damaged.
Page 99
Solution: Dock’s battery is not installed - check the battery if properly installed in the battery case.; - Reinstall battery and clean metal terminals of batteryholder. Cause: Loosed connection between DC cable and dock. The adaptor charging is unstable Solution: once connected.
Page 100
- The metal barrier which does not resist WiFi signal but also absorb electromagnetic energy. Therefore, the biggest metal barrier in your family is those oors with bar-mat reinforcement and the WiFi signal from this directionis impossible to penetrate. The signal will be very weak even though it penetrated.
Page 102
Please read the following instructions carefully. Abide by the safety warnings described in order to use the device safely and properly as it is designed for. These instructions apply to the whole device including all the accessories. Basic Requirements Keep the device dry at all times and prevent from any collision with other objects, including during storage, transportations, and usage of the device.
Page 103
Never install telephone wiring during an electrical storm Never install telephone line jacks in wet locations unless the jack is speci cally designed for wet locations. Never touch exposed (insulation broken) telephone wires or terminals unless the telephone line has been disconnected at the network interface Precautions for Using Wireless Devices When using the device, ensure that the antenna of the device is at least 20 cm away from all persons.
Page 104
Use the appropriate power supply de ned in the speci cations of the charger. An improper power voltage may cause re or of the charger. Do not connect two poles of the battery with conductors, such as metal materials, keys, or jewelries. Otherwise, the battery may be short-circuited and may cause injuries and burns on your body.
Page 105
If the device screen is damaged, do not touch or try to remove the broken part. In this case, stop using the device immediately, and then contact an authorized service center in time. Do not trample, pull, or over bend any cable. Otherwise, the cable may get damaged, causing malfunction of the device. Before cleaning the device, stop using it, power it o , and then remove all the cables connected to it.
Page 107
The use of some functions or third-party applications on your device could result in your personal information and data being lost or becoming accessible to others. Several measures are recommended to help you protect personal and con dential information. Place your device in a safe area to prevent it from unauthorized use. Set your device screen to lock and create a password or unlock pattern to open it.
Page 111
The information within this manual are provided “AS IS”, except required by applicable laws, no warranties of any kind; either expressed or implied, including without limitation, the implied warranties of merchantability and tness for a particular purpose, are made in relation to the accuracy, reliability, or information of this manual. LIMITATIONS OF LIABILITY In no event shall AURA Technology Limited.
TELPAD MA7 USER MANUAL AURA Technology Limited Address: RM810, Star House, 3 Salisbury Road, Tsimshatsui, Hong Kong E-mail: Support@auratech.hk for Android™ Android™ is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.
Page 117
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference ...
Need help?
Do you have a question about the MA7 and is the answer not in the manual?
Questions and answers