Oil Change - Polaris 9922462 Owner's Manual For Maintenance And Safety

Transmission Oil

Oil Change

1. Position the vehicle on a level
surface.
2. Place a drain pan beneath the
transmission oil drain plug area.
3. Loosen the jam nut.
4. Turn the adjuster bolt in to allow
the removal of the drain plug.
5. Remove the drain plug and wipe
the magnetic end clean to
remove accumulated metallic
filings.
6. Allow the oil to drain com-
pletely.
7. Reinstall the drain plug with a
new sealing washer. Torque to
specification.
8. Turn the adjuster bolt out until it
touches the frame, and then turn
an additional 1/2 turn.
9. Tighten the jam nut securely while holding the adjuster bolt.
10. Add the recommended lubricant through the dipstick hole until the
oil level is between the upper and lower limits. Do not overfill.
11. Reinstall the dipstick.
12. Check for leaks.
MAINTENANCE
Jam
Nut
Drain Plug
Adjuster
Bolt
57