Advertisement
Quick Links
Getting started with ThermaRay's
Comfort Controller is as easy as... 1,2,3.
Notes:
o
Your Floor System is calling for heat when a Down arrow is displayed.
o Your System will turn ON when the temperature difference between the comfort settings and the floor or
room temperature is more than 2° Fahrenheit (1°C).
APPLIES TO MODELS SR240/120 FLOOR
Press CANCEL/OCC to put Comfort
1
Control in manual mode.
Verify that the green light is on
2
indicating manual mode.
Choose the desired room temperature
3
using the Up or Down arrows. Press
ENTER/MENU to save the change. You
can change this temperature at any
time.
Advertisement
Summary of Contents for ThermaRay SR240
- Page 1 Your Floor System is calling for heat when a Down arrow is displayed. o Your System will turn ON when the temperature difference between the comfort settings and the floor or room temperature is more than 2° Fahrenheit (1°C). APPLIES TO MODELS SR240/120 FLOOR...
- Page 3 COMFORT CONTROLLER LINE VOLTAGE (SR-240/120 FLOOR) OWNERS MANUAL ThermaRay's Comfort Controller displays the current time and room date. It also displays the room/floor temperature and the given temperature set point. It is programmable and operational in both English and French. See the Secondary Features section on page 4/7 to set language preference.
- Page 4 SET TEMP SCALE SET DAILY PROGRAMMING Continued Press Display Press Display ALWAYS START MENU 12:00AM DATE MENU ENDS AT SETUP 11:59PM SETUP Select ENDS AT TIME FMT 11:59PM End Time ENDS AT SETUP 08:00AM SCALE ? End Time FLOOR SCALE ? 70°F FAHREN FLOOR...
- Page 5 Should if it were Monday. Use "Copy Days" to make all days you forget to cancel the override, the ThermaRay the same and then return to step 4 and modify Comfort Control will remain in the manual override Saturday and Sunday.
- Page 6 SECONDARY FEATURES SET OCCUPIED TEMPERATURE SET TIME FORMAT Use this function to set the default room Press Display temperature when you choose to override your MENU daily programs. To override the daily programs, DATE press CANCEL/OCC to set the control in manual MENU mode (Green LED on).
- Page 7 SECONDARY FEATURES CONTINUED ACTIVATE VACATION TEMP DAYLIGHT SAVINGS TIME Continued Press Display Press Display MENU DAYLIGHT DATE UPDATED MENU 10:45 AM VACATION 01/01/17 MENU VACATION LOCKOUT OPTION For Future Release VACATION ON or OFF TEST GROUND FAULT Press Display VACATION UPDATED MENU DATE...
-
Page 8: Troubleshooting
Room T "*" - Indicates the floor sensor is not working or is of the hazards involved. Please contact your unplugged. No need to worry, your ThermaRay controller defaults to the Face Sensor. Your floor warming system distributor for further instructions will continue to function normally. -
Page 9: System Diagram
(1) year from the date of installation. During this period, ThermaRay Inc will replace or repair the controller without charge if it has been used under normal conditions. The warranty does not cover delivery costs. The warranty does not apply if poorly installed or damaged after installation.
Need help?
Do you have a question about the SR240 and is the answer not in the manual?
Questions and answers