Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Applied fire CFWS10
- Page 1 Water Sensor Model CFWS10 Owner’s Manual • Activates When in Contact with Water • Built in Freeze Alert • For Use with the Comm Link and OmniShield App • Internal Horn for Audible Feedback • Backlit LED Icons for Signaling •...
-
Page 2: Table Of Contents
Table of Contents About Your New Water Sensor ........page 3 Contents of Your Kit ............. page 4 General Warnings on Remote Notification ....page 5 Acceptable Spacing for Sensors ........page 6 Setting Up Your New Water Sensor ....... page 7 How to Install Your Water Sensor ........page 8 Where to Install Your Water Sensor ....... -
Page 3: About Your New Water Sensor
About Your New Water Sensor Thank you for purchasing the Water Sensor made by Applied Fire Technologies, LLC. When used in conjuction with the company’s Comm Link and downloadable OmniShield App, the Water Sensor plays a special role in protecting your home from potentially costly water leaks. -
Page 4: Contents Of Your Kit
Contents of Your Kit Please be sure the following are included in your kit: Instruction Manual Water Sensor Rubber Feet Vertical 2-Sided Mounting Screw Adhesive Feet Key Features • Alerts whenever water contacts the gold plated sensor • Fully compatible with the Comm Link and OmniShield App •... -
Page 5: General Warnings On Remote Notification
General Warnings on Remote Notification and Your Water Sensor WARNING: This device primarily requires remote notification. Its horn is not loud enough to be relied upon as the primary notifier of a water leak situation. WARNING: Loss of electrical power or Internet connection will prevent the unit from sending text/email messages. -
Page 6: Acceptable Spacing For Sensors
Acceptable Spacing for Sensors The sensor-to-sensor radio communicates using radio frequencies between 905.2MHz and 913.2MHz. The range of this radio 200’ (70m) has been tested to 200 ft (70m) in Maximum open area distance testing. The Spacing in Comm Link’s WiFi communicates at Open Area 2.4GHz, which produces a shorter indoor range. -
Page 7: Setting Up Your New Water Sensor
Setting Up Your New Water Sensor Now that you’re familiar with your new Water Sensor, let’s get them set up and installed! The OmniShield App At this point of your setup you should already have the OmniShield App installed and open on your phone. -
Page 8: How To Install Your Water Sensor
How to Install Your Water Sensor The Water Sensor is shipped with three different installation options. Rubber Feet 4 PLACES The rubber feet are designed to prevent the Water Sensor from sliding on the surface, yet to allow for easy cleaning under the unit. -
Page 9: Where To Install Your Water Sensor
Where to Install Your Water Sensor For the Water Sensor to contribute to your home’s protection, it must be located near potential sources of water leaks. Kitchens Excellent locations for Water Sensors are under sinks and dishwashers. Be sure that the placement surface is clear and will allow for a flow of water to reach the sensor. -
Page 10: Where Not To Install Your Water Sensor
Where NOT to Install Your Water Sensor In order for the Water Sensor to be effective, liquid water must be able to contact the gold/red sensor on the underside. Sloped Surfaces The Water Sensor must be placed in such a way as to ensure that water will move TOWARDS the sensor. -
Page 11: Water Sensor Features And Functions
Water Sensor Features and Functions Water Warning Icon (Blue) The blue water DROPLET will flash blue when water has been detected. This will be accompanied by an audible warning tone. A text message will be sent by the Comm Link. Test Freeze Warning Icon (Blue) The blue SNOWFLAKE will flash blue when the... -
Page 12: Fcc Compliance And Ic Notice
FCC Compliance and IC Notice: This device complies with part 15 of the FCC Rules. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 13: Disclaimer Of Warranties
DISCLAIMER OF WARRANTIES APPLIED FIRE TECHNOLOGIES DOES NOT PROVIDE ANY WARRANTY, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE WATER SENSOR PRODUCT, THE OMNISHIELD APP, OR ANY OF THE SERVICES DESCRIBED HEREIN. THE IMPLIED WARRANTIES HERE DISCLAIMED PARTICULARLY INCLUDE, BUT ARE NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. -
Page 14: Limitation Of Damages
LIMITATION OF DAMAGES TO THE EXTENT PERMITTED BY LAW, APPLIED FIRE TECHNOLOGIES, LLC. IS NOT LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES IN ANY WAY ARISING OUT OF (1) THE DESIGN OR PERFORMANCE OF THE WATER SENSOR OR THE RENDERING OF SERVICES DESCRIBED HEREIN, OR (2) ANY ACTUAL OR ALLEGED NON-PERFORMANCE OF THE WATER SENSOR OR FAILURE TO RENDER ANY OF THE SERVICES... -
Page 15: Lifetime Fire/Flood Replacement Policy
To obtain a replacement under this guarantee, contact the manufacturer at Applied Fire Technologies LLC, 825 W. Sandy Lake Rd., Ste. 190, Coppell, TX 75019 USA or at (972) 304-3923 to receive information as to the address to which you should send your damaged or destroyed Water Sensor and accompanying information. - Page 16 825 W. Sandy Lake Road, Suite 190 Coppell, TX 75019 USA www.homesafenetwork.com REV 10.01.16 90-4080-00...
Need help?
Do you have a question about the CFWS10 and is the answer not in the manual?
Questions and answers