FCC Information This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communication.
EQUIREMENT ......................6 2-2 GL2411AP-0A H ARDWARE NSTALLATION ................6 2-3 S OFTWARE IMITATION ........................6 SECTION 3 HOW TO CONFIGURE GL2411AP-0A ACCESS POINT .................................. 7 3-1 I GL2411AP-0A AP NSTALLTION CABLE INDOWS ..... 7 3-2 GL2411AP-0A AP U TILITY ETUP ..................
Section 1 About GL2411AP-0A Access Point Introduction The GL2411AP-0A (11 Mbps WLAN Access Point) is a long-range, high performance LAN product, which provides Access Point services to a 2,4 GHz RF network and bridges to an Ethernet backbone. The design of this product is based on AT76C510 (bridge-on-a-chip) module, a highly integrated ASIC designed to combine legacy LANs with wireless LANs.
Doctors, nurses, retailers, white-collar workers need access to database while being mobile in the hospital, retail store or office campus. 6. SOHO (Small Office and Home Office) users SOHO users need easy and quick installation of a small computer network. 1-4 Product Kit GL2411AP-0A ……………………………………………...……….x 1 Antenna (fixed)………………………………………………………x 2...
Page 6
GL2411AP-0A driver and utility CD…….…………………...…...x 1 A/C Power Adapter…………………………………………………x 1 USB cable…………………………………………………………….x 1 If any of the listed items are not included or found damaged, please contact your local dealer...
GL2411AP-0A can be connected to the 10/100 Base-T Ethernet network. Connect your UTP Ethernet cable to the RJ-45 connector of the GL2411AP-0A AP and connect the other side of UTP Ethernet cable to a hub. 4. Connect the Power Cable Connect the power adapter cable to the DC5V Power Socket of the GL2411AP-0A.
The GL2411AP-0A can be configured by DFU utility for only Windows 98. You need plug the USB cable with the GL2411AP-0A and the USB slot of the PC to run DFU.exe for configuring the GL2411AP-0A and setting the setup. 3-1 Installation GL2411AP-0A AP by USB cable For Windows 98 ®...
Page 9
7. Select “Specify a location” and click “Browse”. On the windows information dialog, double-click the ® “C:\DFU” folder icon from the list and Windows 98 will automatically enter the path. Then click “Next”. ® 8. Windows 98 will then acknowledge that it has found the appropriate driver and click "Next". ®...
Page 10
From the Control Panel, double-click the “System” icon. From the “Properties” menu, please select the “Device Manager” tab. And check that the “BRIDGE DFU DEVICE” device works fine.
3-2 GL2411AP-0A AP Utility Setup DFU (USB Configuration Utility) To setup the utility, please click the “Start” icon and then “Run”. 1. Please type “D:\OEM\Dfu_V1.0\setup.exe.” or use browse the file in the dialog box. Then click “OK” to start the setup. (ps: D: is your CD-ROM driver) 2.
Page 12
5. Setup will add program icon to the program folder shown as blow, then click “Next” for further setup. 6. Please click “DFU Config” folder for installation of USB configuration Utility. 7. After the installation of utility, please click “Finish”. 8.
SNMP Configuration Utility To setup the utility, please click the “Start” icon and then “Run”. Please type “D:\OEM\SNMP_V1.3A\setup.exe.” or use browse to select the file in the dialog box. Then click “OK” to start the setup. (ps: D: is your CD-ROM driver) 2.
Page 14
5. Please click “OEM_Manager” program Group for installation of SNMP configuration Utility. And press “Continue” Button for next step. 6. Wait for screen change. 7. After the installation of utility, please click “OK”.
3-3 GL2411AP-0A AP Configuration Utility DFU (USB Configuration Utility) 1. Click “Start” then, “Program” folder, you will find icon please press icon “DFU” to execute program. 2. Page “Status” will show the DFU status including “Ethernet Address ”, ”ESSID”, ”Channel” and ”WEP”...
Page 16
4. Page “Advanced”, you can change “Authentication Type” “Preamble Type” and “Basic Rate” 5. Page “IP Setting”, you can change “IP Address” and “IP Mask” 6. Page “WEP”, you can change “WEP Key Setting” if WEP is Enabled. And you can use passphrase to generate the key.
7. Page “WEP”, you can not change anything if WEP is disable. 8. Page “About” is our trademark and description. SNMP Configuration Utility 1. Click “Start” then, “Program” folder, you will find icon , please press icon “OEM_SNMPManager” to execute program. 2.Please key in “IP Address”...
Page 18
Page “Basic Setting”, you can change ESSID and Channel. ( The Apply button will be enabled, if you change any data on this page) Page “Advanced”, you can change “Authentication Type” “Preamble Type” and “Basic Rate” ( The Apply button will be enabled, if you change any data on this page) Page “IP Setting”, you can change “IP Address”...
Page 19
6. Page “WEP”, you can change “WEP Key Setting” if WEP is Enabled. And you can use passphrase to generate the key. ( The Apply button will be enabled, if you change any data on this page) 7. Page “WEP”, you can not change anything, if WEP is disable. 8.
Ad-Hoc wireless LAN is applicable at a departmental scale for a branch or SOHO operation. Infrastructure Desktop PC with ethernet Desktop PC with ethernet Sever Ethernet Notebook Notebook with with GL241101 GL241101 Desktop PC GL2411AP-0A GL2411AP-0A with GL241101 Notebook Desktop PC with Desktop PC with GL241101 with GL241101 GL241101...
Extended Service Set (ESS). On account of a continuous connection to the network, users within an ESS can roam freely. All LAN PCs and GL2411AP-0As within one ESS must be configured with the same ESS ID and at the same radio channel.
Appendix C Glossary Access Point ― An internetworking device that seamlessly connects wired and wireless networks. Ad-Hoc ― An Ad-Hoc wireless LAN is a group of computers each with LAN adapters, connected as an independent wireless LAN. Backbone ― The core infrastructure of a network. The portion of the network transports information from one central location to another central location where it is unloaded onto a local system.
Page 24
ESSID ― In infrastructure association , the stations will link to the AP with the same ESSID as they have. WEP ― Wired Equivalent Privacy (Wep) is an encryption scheme used to protect wireless data communication. To enable the icon will prevent other stations without the same WEP key from linking with the AP. Preamble Type ―...