Related Manuals for TCL Moveband MB12
Summary of Contents for TCL Moveband MB12
- Page 1 Quick Start Guide...
- Page 2 Device MOVEBAND LED display Note: • Ensure that the strap is kept clean. Contact with contaminants, such as dust and dye, can cause stains on the strap that may not be able to be fully removed.
-
Page 3: Getting Started
Getting started Charging the battery: Charge the battery before using it for the first time or when it has been unused for extended periods. 1. Pull the strap away from your MOVEBAND device. 2. Take out the charger dock and ensure that the pins in the charging dock are aligned with the pins on the back cover of your MOVEBAND device. - Page 4 4. After fully charging your MOVEBAND, disconnect it from the charger dock. Unplug the charger from the electric socket or computer. Notes: • Use only TCL Communication Ltd. approved chargers and cables. Unapproved chargers or cables can cause the battery to explode or damage the device. • Do not expose the charger to water.
- Page 5 Wearing the MOVEBAND Open the clasp and place MOVEBAND around your wrist. Fit the strap to your wrist and then insert the pin into an adjustment hole. Notes: • Do not bend the strap excessively. Doing so may damage the device. • Optional straps are available for your preference.
- Page 6 • Scan the following QR code. Step 2: Connecting MOVEBAND to your phone via Bluetooth. Pairing mode starts when your MOVEBAND is turned on. Turn on Bluetooth on your phone or in the TCL MOVEBAND app. Search for and connect to your MOVEBAND.
- Page 7 3 LEDs will flash from left to right 3 times. Monitoring your sleep • Wear your MOVEBAND to monitor your sleep status. • You can set a smart alarm using the TCL MOVEBAND app. Music and Camera control Set “Music control”...
- Page 8 Music control • Face your palm down and keep still for 1s. Flip twice to start/pause the music. • Face your palm down and keep still for 1s. Flip once and back again to play the next song. Camera control •...
-
Page 9: Led Status
LED status: Tap your wristband twice to check the battery status. Charging Process Description 100% 3 LED stays on constantly 67–99 % The first two LEDs stay on constantly, the third flashes. 33–67 % first stays constantly, the second flashes. 0–33 % The first LED flashs LED low battery indicator... - Page 10 Level Description The first LED flashes 3 times and vibrates. More information For more information, please refer to the online help in the TCL MOVEBAND app or www.tclcom.com/wearables/.