Related Manuals for Smappee Gas & Water Monitor
Summary of Contents for Smappee Gas & Water Monitor
- Page 1 English Version 1.0.2, as of 9/10/2017 © 2013-2016 Smappee NV. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
-
Page 2: Table Of Contents
Understanding the Cloud Connection ..................5 Understanding the Sensors ......................7 Examples of Gas meters and Water meters ................8 Installing your Smappee Gas & Water Monitor ................. 13 Using the application ......................... 17 F.A.Q............................18 Gas & Water Monitor Installation Manual... -
Page 3: A Word From The Ceo
A word from the CEO Welcome to the world of Smappee You will soon notice that this Smappee Gas & Water Monitor offers nothing but benefits. It immediately gives you clear and simple insights into your gas and water consumption. -
Page 4: Getting Started
Getting started Overview The Smappee Gas & Water Monitor is a device that monitors your Gas and Water usage and sends it to the Smappee Cloud, so you can view it in the app at your disposal. Read this Manual For a successful installation, please read the following sections of this User Manual. -
Page 5: Understanding The Cloud Connection
Understanding the Cloud Connection Overview Before you can use your Smappee Gas & Water Monitor you need to connect it to the Internet and the Smappee cloud. You can do this in two ways: Radio Signal via your Smappee Energy meter ... - Page 6 What connection should I choose? The table below helps you to select the optimal connectivity method. Radio Signal Bluetooth Preconditions You use a Smappee Energy in No Smappee Energy needed. range. Available features View live data Data collected when in ...
-
Page 7: Understanding The Sensors
Smappee Gas and Water. The interruption of the light is the small peak that you will see later on when configuring the optical sensor in the application. -
Page 8: Examples Of Gas Meters And Water Meters
2 pulses per Liter (or 1 per ½ Liter) Note: At the moment, Smappee is not aware of any Gas meter that can be monitored with a Magnetic sensor. Please feel free to share your experience with Smappee Support at Gas &... - Page 9 Meters with reflecting digits The pictures below show meters that have a reflecting surface on one of the digit. This dot can typically be found on the digit 6, 9 or 0. This gas meter has a small reflective surface on the last digit.
- Page 10 Meters with a revolving reflective surface Some meters have a reflecting surface that is attached to a rotating element. This meter has a reflective surface It can be monitored by the optical sensor. We advise placing the sensor a bit more off- center for a good result.
- Page 11 Meters with revolving dials find an example of a Gas meter with black dials. This gas meter has black dials. It can be monitored by the optical sensor. The sensor should be placed above the fastest spinning dial as seen in the picture.
- Page 12 Meters with red revolving dials Some Gas or Water meters have red dials and a very thick cover glass. There is a chance the Smappee Gas & Water Monitor will not be able to monitor these meters. Please contact support@smappee.com for further advice.
-
Page 13: Installing Your Smappee Gas & Water Monitor
Starting the installation To start the installation of your Smappee Gas & Water Monitor, please go to the App and select screen where you can add a new Smappee Gas and Water Monitor. From now on, please follow the instructions in the app. - Page 14 The Bluetooth connection is necessary for the further installation and further configuration of the Smappee Gas & Water Monitor. If your Smappee Gas & Water Monitor does not appear on your -scan. Please note that it can take a few moments before your Smappee Gas &...
- Page 15 If the problem persists, please contact Smappee Support at 4. Setting the decimals, pulses and unit Smappee needs to know how much Gas you consume per rotation, revolution of the dial or hand. Here you can specify the number of decimals and the unit.
- Page 16 To install it at a later time you will have to repeat the installation -step. 6. Choosing the Connection Method (RF or Bluetooth) If you use a Smappee Energy, you can choose to connect your Smappee Gas and Water to your Smappee Energy. Otherwise, you connect it vie Bluetooth of your smartphone.
-
Page 17: Using The Application
Using the application Understanding the Bubbles After successfully installing the Smappee Gas and Water Monitor, you will see two new Bubbles in the main screen. Gas Consumed (m , ft , CFH, ...) Water Consumed (m , L, Gallon, ...) Electricity Consumed (kWh) Solar, Wind, Battery, ... -
Page 18: F.a.q
However, if you connect via Radio Signal to a Smappee Energy Monitor, you can connect multiple Gas & Water Monitors at your location. My Smappee Gas & Water Monitor does not show up in the Bluetooth devices list in the app but I can find it with my phone.
Need help?
Do you have a question about the Gas & Water Monitor and is the answer not in the manual?
Questions and answers