RAM PROMASTER CITY 2017 User Manual page 115

8. The correct wheel bolt torque is 63 ft lbs (86 N·m) for steel wheels and 89 ft lbs
(120 N·m) for aluminum wheels. If you doubt that you have tightened the bolts
correctly, have them checked with a torque wrench by your authorized dealer or
service station.
9. Lower the jack to its fully-closed position.
A loose tire or jack thrown forward in a collision or hard stop could endanger the
occupants of the vehicle. Always stow the jack parts and the spare tire in the
places provided. Have the deflated (flat) tire repaired or replaced immediately.
10. Stow the cable and wheel spacer before driving the vehicle. Refer to "Vehicles
With Alloy Wheels" in "What To Do In Emergencies" in the Owner's Manual on
www.ramtrucks.com/en/owners/manuals for instructions on stowing alloy
wheels.
11. Stow the jack and tools under the driver's seat.
12. Check the spare tire pressure as soon as possible. Correct the tire pressure, as
required.
13. When you place the spare tire back on the winch or if you carry the tire in need
of repair on the winch, always check that the tire is properly secured under the
vehicle by pushing on the stowed tire under the rear bumper at the back of the
vehicle. If the tire has motion when pushed, use the tools to retighten the winch
until a loud click is heard.
W H A T T O D O I N E M E R G E N C I E S
WARNING!
113