Cleaning; Polishing The Vehicle - Polaris 2010 Breeze Owner's Manual

CLEANING

Washing the Vehicle
If a high pressure water system is used for cleaning (not recommended),
exercise extreme caution. The water may damage components and could
remove paint and labels. Avoid directing the water stream at the follow-
ing items:
• Electrical components, wiring, switches and controls, such as turn
signals and dash controls.
• Wheel bearings
• Brakes
• Cab and body panels
• Labels and decals
If warning and safety labels are damaged, contact your Polaris dealer for
free replacement.
Grease all zerk fittings immediately after washing.

Polishing the Vehicle

Polaris recommends the use of common household aerosol furniture
polish for polishing the finish on your Polaris vehicle. Follow the
instructions on the container.
Polishing Tips
• Avoid the use of automotive products, some of which can scratch the
finish of your vehicle.
• Always use clean cloths and pads for cleaning and polishing. Old or
reused cloths and pads may contain dirt particles that will scratch the
finish.
54