Page 1 L-06D INSTRUCTION MANUAL...
Page 3: Confirmation And Settings Before Using
Confirmation and Settings before Using Confirmation and Settings before Using...
Page 4 There are three keys on the front of the terminal. The roles of these keys are shown below. Menu key Tap this key to display the options menu for the current screen or application. Home key If you tap this key, you will return to the Home screen, regardless of the application being used or the screen being displayed.
Page 5 Inserting the UIM UIM is an IC card that stores informations of each Insert a fingernail into the groove in the customer. back cover, and pull up in the direction You cannot use some of the terminal functions if the of the arrow (a) while pressing ●...
Page 6 Remove the battery pack (P35), and Removing the UIM insert the UIM into the slot with the gold- colored IC side facing down Remove the back cover and the battery pack. Gently press the UIM with your fingertip and slide it out Confirmation and Settings before Using...
Page 7: Attaching The Battery Pack
Check the direction of the back cover Battery Pack and attach it to the terminal (b). Press portion to close it firmly (c) Attaching the Battery Pack Make sure there is no gap between the terminal and the back cover. Remove the back cover (P31) Insert the battery pack in the direction of the arrow (a) with the "CE"...
Page 8: Removing The Battery Pack
Removing the Battery Pack Charging Remove the back cover (P31) Battery Pack Life Put your fingernail into the groove, and lift out the battery pack in the direction The battery pack is a consumable accessory. The usage time of the battery per one charge decreases of the arrow (b), pushing it to the gradually each time the battery is recharged.
Page 9: Usage Time (Estimate)
Usage Time (estimate) A list of the charging time (estimate) of a fully charged battery is shown below. The usage time varies depending on the usage conditions and the battery pack condition. For details, refer to "Main Specifications" (P225). Continuous Xi/LTE Stationary (Automatic): standby...
Page 10: Turning On/Off The Power
Turning ON/OFF the Power Note The "Locked" screen appears when the power is turned ON or when the backlight is turned on. Turning ON the Power If the screen lock has been set using a screen unlock pattern, the "Draw pattern to unlock" Press and hold the power key for over 1 screen appears when the power is turned ON.
Page 11: Basic Operations (Touch Screen Operations)
Turning on Backlight Basic Operations (Touch Screen Operations) To prevent unintended operation and to save power, the backlight turns off after a set period. If you then turn The display of the terminal has a touch screen that on the backlight to release the screen lock, the screen allows you to perform various operations by touching it.
Page 12: Touch Screen Operations
Touch Screen Operations Scrolling Screen You can perform the following actions on the touch You can scroll the screen up or down. On some web screen. pages, you can also scroll side to side. Tap: Touch the screen lightly Double-tap: Touch the screen lightly twice successively Drag up or down to Touch for over 1 second: Touch and hold down the...
Page 13: Zooming In Or Out
Zooming In or Out Note Sometimes appears when you drag the Some applications allow you to zoom in on small text screen. You can also zoom in or out by tapping that is difficult to read. After zooming in, you can also this zoom control icon.
Page 14: Using Motion Gesture
Using Motion Gesture Using motion gesture while an incoming call arrives Various functions can be operated simply by moving the „ Muting ringtone terminal. X "Settings" X To use motion gestures, tap When an incoming call arrives, flip the "Gesture" from the Home screen, and place a check terminal mark in each item.
Page 15: Changing Screen Orientation
Using motion gesture in gallery Changing Screen Orientation „ Viewing previous/next image The terminal screen automatically rotates to horizontal While an image in gallery is being (landscape) or vertical (portrait) views, depending on the direction in which it is turned. displayed, tap the left or right side of the terminal The left or right image is displayed.
Page 16: Initial Settings
X "Next" second "Set" / "Not set" on the "Use Osaifu- to cancel the screen lock Keitai" screen X "Next" On the "あなたのL-06Dです。ガイドに Tap "Set" on the "docomo apps 沿って設定をはじめましょう" screen, tap password settings" screen, input a "続ける"...
Page 17: Configuring Wi-Fi Settings
Configuring Wi-Fi Settings The terminal connects to the Internet via access points for Wi-Fi networks or public wireless LAN services. To connect, you must configure the access point connection settings on the terminal. „ Reception interference caused by Bluetooth devices As the terminal's wireless LAN devices and Bluetooth device use the same frequency (2.4 GHz), reception interference may occur or the...
Page 18 Connecting to a Wi-Fi network Note X "Settings" There are two types of available networks - open From the Home screen, networks and protected networks. The network X "Wireless & networks" type is indicated by an icon to the network The "Wireless &...
Page 19 Connecting to a Wi-Fi network by Notifying when Wi-Fi network with no specifying a static IP address security protection is detected X "Settings" X "Settings" From the Home screen, From the Home screen, X "Wireless & networks" X "Wi-Fi X "Wireless & networks" X "Wi-Fi settings"...
Page 20 Adding a Wi-Fi network Changing the Wi-Fi network password X "Settings" X "Settings" From the Home screen, From the Home screen, X "Wireless & networks" X "Wi-Fi X "Wireless & networks" X "Wi-Fi settings" settings" The "Wi-Fi settings" screen appears. The "Wi-Fi settings"...
Page 21 Setting Wi-Fi to sleep mode Setting Online Service Accounts Set Wi-Fi to sleep mode and specify the timing of You can update your status on Google and other online switching the terminal to data communications. services once you have set up your online service X "Settings"...
Page 22 Deleting an online service account Note X "Settings" If you mark the "Background data" checkbox, From the Home screen, all installed applications on the terminal X "Accounts & sync" will automatically communicate with their The "Accounts & sync settings" screen appears. respective services.
Page 23: Screen Display/Icons
Main status icons Screen Display/Icons Signal strength Status Bar Out of service area The status bar is displayed at the top of the screen. The terminal status and notifications are displayed in the Bluetooth ON status bar. Notification icons are displayed on the left Connected to Bluetooth device side, and the terminal status icons are displayed on the right side.
Page 24 Main notification icons The battery needs to be charged The battery is charging New Gmail GPS enabled New SMS message GPS is positioning Problem with an SMS message Airplane mode activated New Google Talk message UIM locked or UIM not inserted Making a call or during a call Phone microphone is muted Call on hold...
Page 25: Notification Panel
Notification Panel Problem with login or synchronization Notification icons are displayed in the Notification Update of installed application available panel. You can open notifications, such as messages, Viewing 1Seg reminders, or event notifications, directly from the Notification panel. More notifications Opening the Notification panel Connected to a VPN/Not connected to a Drag or swipe the status bar downwards...
Page 26: Closing The Notification Panel
Silent mode Viewing notification details Switch between on and off. Touch for over 1 second to display the "Sound settings" screen. Tap the notification message on the Wi-Fi Notification panel Switch between on and off. Touch for over 1 second The notification details are displayed in the to display the "Wi-Fi settings"...
Page 27: Character Entry
„ On-screen QWERTY keyboard Character Entry Use this for entering Japanese in "Roman letter input". The terminal has an on-screen keyboard that is displayed in the touch screen for character entry. Character Entry Using the On- screen Keyboard If you tap a text box on the screen, the on-screen keyboard appears in the touch panel.
Page 28 Deletion key Note Deletes the character to the left of the cursor. Touch The key display varies depending on the entry this for over 1 second to delete the characters screen or character mode. continuously. For information on switching the type of on- Right cursor key screen keyboard, refer to "Switching the The highlight moves to the right.
Page 29: Switching The Character Mode
"10-key ⇔ QWERTY" Entering symbols/emoticons The keyboard is switched. in a character entry screen to switch to symbol/ When the input mode is changed, the keyboard emoticon input mode, and display the available symbols switches automatically. Switch back using "10- and emoticons on the display.
Page 30 Keyboard This allows you to set the type of Conversion Type keyboard to use on each screen Input Word If you mark this checkbox, the phrase view (horizontal/vertical) or for each Learning confirmed by the conversion process input mode. is learned by iWnn IME. Voice Input Mark the checkbox to enable voice Word...
Page 31: Home Screen Management
Moving Shortcuts, etc. Home Screen Management From the Home screen, touch the icon you What You can Add to the Home want to move for over 1 second Screen Drag the icon and release your finger The icon is moved. You can customize the Home screen.
Page 32: Changing Folder Names
Uninstalling Applications and Changing Kisekae Widgets Change the wallpaper and icon of the Home screen to change the image. From the Home screen, "Applications" Touch the Home screen for over 1 second Touch the application you want to delete for The "Add to home screen"...
Page 33: Changing Wallpaper
Changing Wallpaper Adding Home Screens You can add Home screens. Touch the Home screen for over 1 second X "Home From the Home screen, "Wallpaper" screens" "Gallery" / "Live wallpapers" / "Wallpaper The "Home screens" screen appears. gallery" You can create up to 12 Home screens. If you have tapped "Gallery", tap an image that Tap one of the thumbnails with a "+"...
Page 34: Deleting Home Screens
Deleting Home Screens X "Home From the Home screen, tap screens" The "Home screens" screen appears. Touch the thumbnail for over 1 second, drag it over to and release your finger Note It is also possible to delete by tapping "Delete" displayed in the balloon of Step 2.
Page 35: Manage Applications
Manage Applications Note This is a list of the applications that have been installed in this terminal at the time of purchase. Adding Shortcuts to the Home If the software is updated, application content Screen and icon positions may change. The names of some applications may not be From the Home screen, "Applications"...
Page 36: Group Management
Moving Applications Group Management Manage groups on the application screen and sort From the Home screen, "Applications" icons. Touch the application you want to move for over 1 second Adding Groups Drag the application and release your From the Home screen, "Applications" finger X "Add group"...
Page 37: Deleting Groups
Editing Group Names Adding Groups to the Home Screen From the Home screen, "Applications" From the Home screen, "Applications" Touch the group name for over 1 second, and tap "Edit name" Touch the group name for over 1 second, and tap "Add" Enter a new group name and tap "OK"...
Page 38: Searching Applications
Searching Applications Home Application Information You can view the operation guide for the docomo Palette From the Home screen, "Applications" X "Search" X "More" X From the Home screen, The Search widget starts. Enter a keyword or "Help" use Voice Input to search. An explanation for the docomo palette UI operation is displayed.
Page 39: Home Application Settings
Home Application Settings X "More" X From the Home screen, "Home settings" "Home settings" screen appears. Personal area Personal area is displayed. Wallpaper loop The wallpaper display is looped. Sync function Auto communication is executed when personal area information is updated. International Auto communication is roaming...
Page 40: Calling / Network Services
Calling / Network Services Making/Receiving Calls Making a Call You can use the terminal to make international calls and emergency calls, as well as standard calls. You can also enter a pause when using phone services, such as reserving tickets or checking your bank balance. Making a call From the Home screen, "Phone"...
Page 41: Emergency Call
Ending a call During a call, "End" Emergency call Emergency call Phone number Police Fire department or ambulance service Japan Coast Guard Note When you are making an emergency call (110, 119, and 118) from your terminal, be sure to notify that you are calling from a mobile phone and give your mobile phone number and present location clearly, as the police/fire department may call you back for confirmation.
Page 42 Depending on the location from which you make an emergency call, connection may be made to the fire department or the police of another jurisdiction. In Japan, the 110, 119, and 118 emergency numbers cannot be dialed when UIM is not inserted, from the PIN code input screen or from the PIN unblocking key input screen.
Page 43: Receiving A Call
Calls to mobile phone Receiving a call From the Home screen, "Phone" X When an incoming call arrives, tap "Activate" X "Accept" "Dial" The "Dial" tab appears. You can talk to the caller. Enter "010" X Country code X Note Recipient's mobile phone number, and If the caller has been saved in Contacts (Phonebook), the caller's name and phone...
Page 44: Operations During A Call
Operations during a Call Note Do not hold the terminal against your ear with During a call, you can adjust the volume, turn the the speaker ON. speaker ON/OFF, mute the microphone, and put the call Speak into the terminal from a distance of no on hold, depending on the usage conditions.
Page 45 Call icon Call Log : Call icon without caller ID notification : Call icon other than without caller ID notification This automatically records a history of your incoming and outgoing calls. You can also use the call log to call a Logs with the same person are displayed together as phone number or add it to Phonebook.
Page 46: Calling A Number From The Call Log
Calling a Number from the Call Log Registering Phone Numbers from the Call Log to the Phonebook You can make calls to the phone numbers stored in the call log. You can register unregistered items from the call log to From the Home screen, "Phone"...
Page 47: Deleting The Call Log
Deleting the Call Log Displaying the Phonebook The call log is automatically added. However, you can You can view all the information that is saved in delete a call log or all call logs. Phonebook. From the Home screen, "Phone" X Deleting a desired call log "Phonebook"...
Page 48: Editing Phonebook
The Phonebook (profile) is displayed. Registering Phonebook Call log is displayed. You can also confirm the sent/ You can register a new phonebook. received details for sp-mode mail and SMS. On the "Phonebook" tab, "Register" Your profile (My profile) is displayed. When multiple accounts are registered, select Tap the icon that is displayed by selecting the image the account for which you want to create a...
Page 49: Searching The Phonebook
Searching the Phonebook Making Calls/Sending Emails/ Chatting via Phonebook You can search for a phonebook on the "Phonebook" tab by dragging in the tab or by text entry. You can make a call directly from Phonebook. If you On the "Phonebook" tab, "Search" have added an email address or chat account to the phonebook entry, you can also send an email or launch Enter the word(s) that you are looking...
Page 50: Deleting Phonebook
Viewing the Map of a Contact's Note Address You can also delete a phonebook by tapping X "Delete" on the "Phonebook" tab, placing a If the address has been added to the Phonebook, you mark on the phonebook you want to delete, and can view its location in a map.
Page 51 Adding a Phonebook to Favorites When you add a phonebook to Favorites, it appears on the "Favorites" tab. The "Favorites" tab allows you to quickly display a specific Phonebook. On the "Phonebook" tab, tap the phonebook that you want to add to Favorites The Profile screen appears.
Page 52 Message recording From the Home screen, "Phone" X "Dial" Enter the phone number X Tap "Koe-no-Takuhaibin" The terminal is connected to the Koe - no- Takuhaibin Service Center. Record a message according to the voice guidance. You can also send it from the "Recent calls" and Phonebook.
Page 53: Voice Mail Service
Voice Mail Service If you are in a location with no radio reception, the terminal is powered off, or you are unable to take the call within the preset ring time, the Voice Mail Service answers a call with a voice mail greeting and records the caller's message.
Page 54 Basic flow of the Voice Mail Service Setting the Voice Mail Service X "Settings" From the Home screen, Start the Voice Mail Service. X "Call settings" X "Network service" X ▼ "Voice mail service" A call is made to your terminal. The "Voice mail service"...
Page 55 Playing a voice message Checking Check whether there is a new messages Voice Mail message. After Drag or swipe the status bar downwards checking, the completion message appears. The Notification panel appears. "Voice mail" X "OK" Message Configure the setting for whether notification to notify when new messages The terminal is connected to the Voice Mail...
Page 56: Call Waiting Service
Call Waiting Service Putting the current call on hold and answering an incoming call When there is another incoming call while you are on a call, the in-call ringtone notifies you of the second call. If you hear a beep during a call, You can answer the second call by putting the first call "Activate"...
Page 57: Call Forwarding Service
Putting the current call on hold and Call Forwarding Service making a call to another party The Call Forwarding Service forwards a call to a preset During a call, "Add call" forwarding number if you do not answer the call within the preset ring time, or are outside of the service area The "Dial"...
Page 58 Setting the Call Forwarding Service Call charge for the Call Forwarding Service X "Settings" From the Home screen, X "Call settings" X "Network service" X Caller "Call forwarding service" ▼ Call charges are incurred by The "Call forwarding service" screen appears. the caller.
Page 59: Caller Id Notification Service
Setting the Call Forwarding guidance Caller ID Notification Service on/off When making a call, your phone number can be shown From the Home screen, "Phone"X "Dial" in the display of the other party's phone. The "Dial" tab appears. Note "1" X "4" X "2" X "9" X The Caller ID Notification Service is not available Voice guidance is played.
Page 60: Public Mode (Power Off)
Public Mode (Power OFF) When you receive at a public location where you want to refrain from using or while driving, guidance is provided to callers. Public mode (Power OFF) guidance is also played when you are outside of the service area or when there is no signal.
Page 61 Setting Wi-Fi access point Wi-Fi Tethering Settings X "Settings" From the Home screen, Connect wireless LAN compatible device up to eight X "Wireless & networks" X "Portable devices to the Internet simultaneously using the terminal as a Wi-Fi hotspot. hotspot" "Portable Wi-Fi hotspot settings"...
Page 62 Connecting to a VPN Connecting to VPN (Virtual Private Network) In VPN list, tap a VPN name to connect A menu appears. VPN (Virtual Private Network) is a technique to access Tap "Username" X Enter a user name to the information protected in local network from other networks.
Page 63 Deleting a VPN Setting an additional access point <New APN> In VPN list, touch a VPN name to delete X "Settings" for over 1 second From the Home screen, X "Wireless & networks" X "Mobile A menu appears. networks" X "Access Point Names" X "Delete network"...
Page 64: Initializing An Access Point
Setting mopera U Initializing an Access Point X "Settings" From the Home screen, When you initialize an access point, it returns to its X "Wireless & networks" X "Mobile default settings. X "Settings" networks" X "Access Point Names" From the Home screen, X "Wireless &...
Page 65 Remote Set to remotely control the operation terminal from a docomo mobile settings phone, land-line phone, NTT public phone, etc. Public mode "Public Mode (Power OFF) (power OFF) Settings" (P99) settings Settings...
Page 66 Sound Feedback Audible touch Set whether to play a sound when a This allows you to configure various sound settings, tones phone number is entered. such as the type and volume of ringtones, Silent mode and Vibrate. Audible Set whether to play a sound when a selection menu item is selected.
Page 67 Display Gesture This allows you to configure display settings, such as This allows you to enable or disable each motion screen brightness and animation. gesture. Brightness Set the screen brightness. Home screen Auto-rotate Set whether to automatically change Rearrange You can change item locations by screen the screen display when the terminal items...
Page 68: Location And Security
Location & Security Device administration Select device Add or delete the administrator of This allows you to configure settings such as GPS, administrators this terminal. screen lock and passwords. Credential storage My location Use secure Set whether to allow the application Use wireless Display the current location in an credentials...
Page 69 Security Code and UIM Protection Note <On-Screen Unlock> For convenient and secure use of the terminal, you can If you enter incorrect screen-unlock patterns set codes to lock the terminal and network security 5 times, a message prompting you for reentry codes to be used with network services.
Page 70: Network Security Code
PIN code Your PIN unblocking key is written in the application form (copy for subscriber) given at The UIM can set security code named PIN code. This the time of contract. If you have subscribed at code is set to "0000" at the time of subscription, but you a place other than a docomo Shop, bring your can subsequently change it.
Page 71 PIN unblocking key (PUK) Changing PIN code The PIN unblocking key (PUK) is an 8-digit number X "Settings" From the Home screen, used to unblock the PIN code. You cannot change it by X "Location & security" yourself. If you enter the PUK code incorrectly ten times in a "Set up SIM/RUIM card lock"...
Page 72: Select Device Administrators
Enter PIN code Device management This the following operations if you are asked to enter Configure device management settings to use Omakase the PIN code when the terminal is powered on. Lock. X "Settings" Enter the PIN code of the UIM, and tap From the Home screen, X "Location &...
Page 73: Accounts And Sync
Applications Accounts & Sync This allows you to configure applications' settings. This allows you to configure the settings of accounts and their synchronization. Unknown Configure whether to allow the sources installation of the applications that General sync settings are supplied by other than Android Background Set whether the applications always market.
Page 74 Privacy Storage This allows you to initialize data. This allows you to display the free space in internal memory. Personal data Internal storage Factory data Delete all data from the terminal. reset Available Display free space of internal space storage. Initializing Terminal X "Settings"...
Page 75: Language And Keyboard
Language & Keyboard Voice Input & Output This allows you to configure the terminal's language and This allows you to configure settings for voice input and keyboard settings. output. Language settings Voice input Select Select the language used on the Voice Configure the settings of voice language...
Page 76 Activating USB Tethering Note Hardware requirements of a PC for USB Connect the terminal and a PC using USB connection tethering are as follows: cable to connect the PC to the Internet using the - OS*: Windows 7/Windows Vista/Windows XP terminal as a modem.
Page 77: Date And Time
Date & Time About Phone This allows you to configure the date and time settings. This allows you to display various informations of the terminal. Automatic Set the automatic retrieval of date and time information via the network. Software Change software update settings. Update Set date Configure the date settings.
Page 78: Displaying Your Own Number
Software Display the software version of the version terminal. Displaying your Own Number X "Settings" From the Home screen, X"About phone" "Status" The "Status" screen appears. Your own number appears as "My phone number". Settings...
Page 79: Mail / Internet
Mail / Internet sp-mode Mail This allows you to send and receive emails using an You can send and receive text messages containing i-mode mail address (@docomo.ne.jp). up to 70 double-byte characters (or 160 single-byte It allows you to use pictograms and Deco-mail, and also alphanumeric characters) to other terminals.
Page 80 Receiving/Viewing an SMS Note Message X "Insert smiley" while entering a message to insert a pictogram. Although an From the Home screen, "Applications" emoticon appears on your "Enter Message" box, X "Messaging" the pictogram is displayed if the message is received on an Android compatible phone.
Page 81: Opening Gmail
Creating and Sending an Gmail Gmail If you have a Google account, you can send and From the "Inbox" screen, receive emails using Gmail. If you do not have a Google "Compose" account, you must open an account before using Gmail. The "Compose"...
Page 82 Receiving Area Mail Early Warning "Area Mail" You can receive Earthquake Early Warnings provided by Receiving Area Mail automatically the Japan Meteorological Agency. When an Area Mail is received, a dedicated Area Mail is a free service that does not require ringtone sounds and the text of the Area Mail is application.
Page 83: Setting Area Mail
Setting Area Mail Browser Browser allows you to view web pages in the same way From the Home screen, "Applications" that you can from a PC. X "Area Mail" The "Early warning 'Area Mail' Inbox" screen Opening Browser appears. X "Settings" From the Home screen, "Browser"...
Page 84 Bookmark button The "Bookmarks" tab appears. Previous web page The previous page is displayed. Next web page The next page is displayed. Zoom Tilt the terminal toward you while touching to zoom in the web page. Tilt it away from you to zoom out. Switching windows You can switch to the selected window when accessing web pages via multiple windows.
Page 85: Using Bookmark And History
Searching for a web page by voice entry Using Bookmark and History Tap the search box Bookmarking a web page allows you to quickly access that web page. You can also view previously visited web pages by "Speak now" appears. displaying your browsing history.
Page 86: Changing Browser Settings
Changing Browser Settings Talk X "More" Google Talk is a Google instant messaging program. It From the Browser screen, allows you to chat (text chatting) with friends who have X "Settings" Google accounts. To use Google Talk, you must set up A menu appears.
Page 87 Chatting Tap a friend's account on the "Talk" screen The Chat screen appears. Tap the "Type to compose" box X Enter your message and tap "Send" The text that you entered in the "Type to compose" box is sent. For details about Google Talk, from the Google X "Settings"...
Page 88: File Management
File Management File Operation Note Operating environment of a PC for file operation You can synchronize music with "Windows Media is as follows: Player" on your PC by connecting the terminal with the - OS*: Windows 7/Windows Vista/Windows XP PC via the supplied USB connection cable, and transfer (Service Pack 3 or later) the data between the PC and the terminal by dragging - Windows Media Player: Windows Media...
Page 89: Folder And File Operations
Folder and File Operations Note For details about Windows Media Player, refer to Windows Media Player help. Note Do not turn off the terminal while reading or writing data. Do not unplug USB connection cable while reading or writing data. It results in loss of data. Synchronizing Data with Windows Media Player This allows you to synchronize music and videos with...
Page 90: Bluetooth Communication
Disconnecting the terminal from a PC Bluetooth Communication Stop and remove the removable disk Connect the terminal to Bluetooth devices wirelessly, safely from PC and enable to exchange data. For Bluetooth compatible version or profile, refer to ® ® For example, for Windows 7/Windows Vista "Main Specifications"...
Page 91 Turning ON Bluetooth Function to Pairing/Connecting with Other Make the Terminal Discoverable Bluetooth Device To transfer data by Bluetooth connection, perform X "Settings" From the Home screen, pairing (pairing setting) with the device in advance and X "Wireless & networks" X "Bluetooth register it to the terminal.
Page 92 When the other device requests for Note pairing Even for device requiring entry of pass code (PIN) when pairing, once pairing is performed, When a screen asking for pairing for Bluetooth entering pass code (PIN) is not necessary for connection appears, tap "Pair & connect" or enter pass next connection.
Page 93: External Device Connection
Sending/Receiving Data via External Device Connection Bluetooth Function Connecting the Terminal with a PC Set the Bluetooth function to ON beforehand to be discoverable. Make sure that Windows Media Player 11 or later and dedicated driver are installed on PC. If Windows Media Sending data via Bluetooth Player 11 or later and dedicated driver are not installed, You can send data of Phonebook (name card data in...
Page 94 Connect the microUSB connector of Request for installation of the device driver may appear on your PC. If it appears, cancel it. USB connection cable to the microUSB is displayed in the status bar. connection terminal of the terminal The "USB connection mode" screen appears on Insert the microUSB connector horizontally with the terminal.
Page 95 Note While connecting to a PC, drag or swipe the status bar down to open the Notification panel, and then tap "Charge only", "Mass storage", "PC sync", or "USB tethering" to display the "USB connection mode" screen, and then you can change the USB connection mode.
Page 96: Before Shooting
Application Notes for capturing images Camera The Camera employs high precision technology, but The terminal has a built-in camera that can shoot some pixels or lines may seem brighter or darker photos and videos. than others. Also, when you shoot photos in places with insufficient lighting, noises seen as white line Before Shooting increase.
Page 97: Shooting A Photo
Shooting a fast moving object may result in an image Shooting a Photo slightly distorted from the image displayed on the screen at the time of shooting, or the image may be You can shoot photos with both horizontal and vertical blurred.
Page 98 Flash Shooting a photo Set flash mode to Auto, Off or On. From the Home screen, "Applications" Settings (while shooting photos) X "Camera" Set Focus/Image size/Scene mode/ISO/White balance/Color effect/Timer/Shot mode/Auto review/ The photo shooting screen is displayed. Tag location (horizontal screen). Menus appear on the screen to allow you to Auto focus frame configure various settings to suit the scene and...
Page 99: Shooting Videos
Shooting Videos Note Menus are displayed on the preview screen You can shoot videos by switching modes. Videos are after shooting a photo. The following operations shot horizontally. are available. Viewing shooting screen <Left part (Top part for vertical screen)> - "Share": Send via Bluetooth, Gmail, Picasa, The meanings of marks (icons and others) on the video etc.
Page 100 Flash Shooting videos Set flash mode to ON or OFF. Settings (when shooting video) Drag on the photo shooting screen. Set the video size/white balance/color effects/audio The screen switches to the video shooting recording/auto review. screen. Menus appear on the screen to allow you to Sound (On/Off) configure various settings to suit the scene and Switch button...
Page 101: Viewing Photos And Videos
Gallery Note Menus are displayed on the preview screen Gallery allows you to view photos/videos in a slide show. after shooting a video. The following operations Photos can be trimmed. are available. <Left part> Viewing Photos and Videos - "Play": Play the shot video. - "Share": Send via Bluetooth, Gmail, YouTube, From the Home screen, "Applications"...
Page 102 - Tap the left/right side of the terminal to view Note previous/next image when you place a A screen appears to enable/disable thumbnail check mark on "Previous/next picture" for the selection if you tap on the Gallery screen, "Gesture" settings (P44). or touch one thumbnail for over 1 second.
Page 103: Media Player
Copying Music Files and Videos Media Player to the Terminal The "Media Player" application plays music files and video files saved on the storage. Media Player supports From Media Player, you can play music files and video the following file formats. files of your own after copying them to a storage.
Page 104: Opening The Media Player
Opening the Media Player Note This terminal can be connected to most devices From the Home screen, "Applications" supporting the USB mass storage interface and X "Media Player" the following operating systems (OS). ® - Windows 7 (32-bit/64-bit version) The "Media Player" screen appears. ®...
Page 105 Quick play bar MUSIC Store: Access the dmarket Music Store. While a list of videos is displayed, the "VIDEO This is displayed when there is music playing/ Store" icon appears. Tap this to access the paused. dmarket VIDEO Store. Tap this to display the Music screen. Play/Pause icon Note This is displayed for the music playing/paused.
Page 106: Playing Music
Cover flow Playing Music Tap to switch between display/not display elapsed time, play progress bar, and song length. In the song list, tap a song you want to Flick left or right to scroll through the thumbnails on play horizontal screen. The Music screen appears and the song is Contents information played.
Page 107: Playing Videos
Playing Videos Note While a song is playing, is displayed in the From the "Media Player" screen, tap status bar. X "Settings" A list of playable videos saved on the storage From the Music screen, tap X "This song : Ringtone settings" to set the appears.
Page 108: Using Playlists
Elapsed time Using Playlists Play progress bar Playlists allow you to play your favorite songs in a Drag or tap to play a video from a desired point desired order. within the video. Video information Set to view playlists Displays titles/artist names. With the initial setting, the bottom bar of the "Media Video list button Player"...
Page 109 Displaying playlists Creating a playlist From the "Media Player" screen, tap In the Playlists, tap "New" "Play list" "Add songs to playlist" Current playlists are displayed. Tap the "All songs", "Artists", and "Albums" tabs The following quick playlists are available. to switch the display list.
Page 110 After you finish editing, tap "Save" Setting the Media Player Deleting/sorting a playlist From the "Media Player" screen, "Settings" In the Playlists, tap "Edit" The "Settings" menu appears. Tap "Delete all playlists" to delete all playlists. Change the settings if required Tap on a playlist to make turn red and become a deletion target.
Page 111: Opening Android Market
Arrange icons Drag and drop to change the Market icons displayed on the bottom Android Market enables you to access applications and bar of the "Media Player" games you like and download them to install into the screen. terminal. If you change the icons to "Play list", "Genre", or "Age", you can display lists Opening Android Market...
Page 112 Searching or Installing an Note Application Be sure to check the security of application, and then install it at your own risk. The terminal Search for the desired application may be infected with a virus and the data may be damaged. If you tap and enter a key word on the NTT DOCOMO is not liable for malfunctions, if...
Page 113 Updating an Application Note Read the application details carefully. Once you If an installed application is updated, the notification install the application, you accept liability for its icon appears on the status bar. You can also check the use. update information on the "My Apps" screen. Once you You are required to purchase those paid have confirmed the availability of an update, you can applications.
Page 114: Purchasing An Application
Uninstalling an Application Purchasing an Application You can uninstall applications whenever you want. Before downloading a paid application, you must first purchase it. Try it for free within a certain period. If you Tap any of application on the "My Apps" do not ask for a refund within a certain period after screen purchasing, your credit card will be charged.
Page 115 Tap the answer that best matches your Purchasing an application reason, and then "OK" Tap an application that you want to purchase Maps The application's functions and other users' comments and evaluations appear. "Maps" enables you to show your current location, Price button X "Accept &...
Page 116 Location Information Services Mobile networks, Wi-Fi and GPS methods are available to obtain current locations. With Wi-Fi current locations can be speedily determined, but accuracy is lacking. If GPS is used, it takes more time, but accurate positioning can be obtained. When determining current locations, activate both Wi-Fi and GPS to utilize both of Application...
Page 117 Enabling location search by Wi-Fi Note X "Settings" This terminal is equipped with a GPS receiver From the Home screen, that uses satellite signals to calculate current X "Location & security" locations. Some GPS functions use the Internet. Place a check mark on "Use wireless Transferring data may incur charges.
Page 118 Open Maps Viewing Street View You can switch to the Street View of your current From the Home screen, "Applications" location. X "Maps" From the Maps screen, touch the section Google Maps opens. that you want to view in Street View for Refer to the following to zoom in or zoom out a over 1 second map.
Page 119 Searching for a Specific Location Note You can also search by voice entry. For details, From the Maps screen, tap the "Search refer to "Searching for a web page by voice Maps" box and enter the location that entry" (P128). you are looking for In addition to the address, you can specify city Changing Layer...
Page 120 Deleting a layer My Maps View My Maps you created on your PC. You can only view My in the "Maps" screen Maps on the terminal. You cannot create My Maps on the terminal. The "Layers" menu appears. Tap the checked layer Wikipedia Display to view a Wikipedia article...
Page 121 Select as your mode of Note transportation If the routes are searched by car, on foot, or on "Get directions" bicycle, the routes are displayed on the map. Tap the icon on the top left of the screen to A list of routes to your destination appears. choose the mode of transportation, "Driving", Tap one of the routes "Transit", "Walking"...
Page 122 Clearing a Map Latitude You can clear all displayed layers and route search Google Latitude enables you and your friends to check results. each other's locations on maps and share status messages with each other. It also enables you to send in the "Maps"...
Page 123 Tap one of the items Opening Latitude Enter or select your destination to start route From the Home screen, "Applications" guidance. X "Latitude" "Speak Destination": Search for destination via voice. Latitude opens and a list of members with "Type Destination": Enter the characters of your Google accounts appears.
Page 124 Places 1Seg You can use Places to easily search for nearby 1Seg is a digital terrestrial TV broadcasting service for restaurants, cafes, bars, travel spot, ATMs, gas stations, mobile devices that allows you to receive data programs and other places of interest. along with video and audio.
Page 125 1Seg Viewing From the Home screen, "Applications" X "TV" The 1Seg viewing screen appears. When activating it for the first time, it is necessary to accept the terms of service and to select your viewing area. Application...
Page 126 TV broadcast area Viewing the 1Seg viewing screen Flick left or right to switch channels. Vertical screen display shows the data broadcast. Tap to display the TV operation screen. Data broadcast area Tapping directly on the content of the data broadcast may allow you to operate.
Page 127 Viewing the TV operation screen Tap the TV broadcast area/subtitle display area on the 1Seg viewing screen to temporarily display the TV operation screen. Channel, Broadcast station, Program name "Channels" tab Tap to display the channel list. Tap on a channel to switch channels.
Page 128: Viewing Reservations
Tap on a program Fixing the screen orientation Program information is displayed. You can fix the screen orientation that is currently Tap " ワンセグ " (1Seg) X " ワンセグ起動 " displayed. (Activate 1Seg) to switch the channel to view the X "Fix From the 1Seg viewing screen, 1Seg viewing screen.
Page 129: Using Tv Link
Using TV Link Note The start of a program cannot be notified if the Some data broadcasts may show link information terminal power is OFF at the reservation time. (TV link) to related sites. By registering a TV link, it is possible to connect to related sites later.
Page 130 1Seg Settings Other Channel Create and edit channel settings setting lists, switch channel From the 1Seg viewing screen, lists, and initialize channel lists. "Settings" The "Settings" menu appears. Alarm Configure the settings setting for the viewing Change the settings if required reservation alarm.
Page 131: Osaifu-Keitai
Creating a channel list Osaifu-Keitai From the 1Seg viewing screen, Osaifu-Keitai is equipped with an IC card, so by waving "Settings" X "Channel setting" X the terminal close to a reader at a shop, it is possible to make payments or use coupons or participate in stamp "Channel list edit"...
Page 132: Using Osaifu-Keitai
We are not responsible for damages such as lost Swiping Close to Readers or changed data in the IC card, or other damages related to Osaifu-Keitai compatible services in any Communication can be executed by swiping the cases including terminal malfunction or terminal mark close to a reader.
Page 133 Canceling the lock Locking Osaifu-Keitai From the Home screen, "Applications" Lock the Osaifu-Keitai service from being used. After X "Osaifu-Keitai" locking, data cannot be acquired from the reader. From the Home screen, "Applications" The "Service List" screen appears. X "Osaifu-Keitai" X "Osaifu-Keitai Lock Setting"...
Page 134 Depending on IP setting, ToruCa that can be ToruCa displayed on the map from ToruCa (details) may ToruCa is an electronic card that can be loaded to your not be able to be displayed on the map from mobile. It can be acquired from readers and websites as ToruCa list.
Page 135: Alarm Clock
Setting Alarm Alarm Clock on the Alarm Clock screen From the Home screen, "Applications" X "Alarm Clock" The "Alarm" screen appears. "New alarm" The following functions are available by switching tabs. The "Set alarm" screen is displayed, and the : Alarm following settings are available.
Page 136: Setting The Timer
Set alarm details and tap "Save" Setting the Timer The "Alarm" screen is displayed. The set alarm is added to the list. Set the alarm ON or OFF by on the Alarm Clock screen tapping The Timer screen is displayed, and the following Tap the list to display the "Set alarm"...
Page 137: Opening Calendar
Setting the Stopwatch Calendar on the Alarm Clock screen Calendar "Start" The terminal has a calendar for managing your The stopwatch starts. Tap "Lap" to count lap schedule. It can synchronize with scheduler built by times. Microsoft Exchange Server or with Google Calendar if To stop the stopwatch, tap "Stop".
Page 138 Setting calendar type to display Changing Calendar Display/ Displaying Schedule From the Calendar screen, "Calendars" Changing to Day/Week/Month view The registered calendar types are displayed. of the calendar you want to Tap "Day" / "Week" / "Month" in the display change display box appears, update is automatically running.
Page 139: Creating A Schedule
Viewing your schedule Note As the schedule time approaches, appears From the Calendar screen, tap the in the status bar. Drag or swipe the status bar schedule that you want to view downwards to open the Notification panel then The "Agenda" screen appears, and a list of your tap the calendar notification, the "Calendar schedules is displayed.
Page 140 Calculator SmartWorld From the Home screen, "Applications" From the Home screen, "Applications" X "Calculator" X "SmartWorld" The Calculator screen appears. The “SmartWorld" screen appears. Calculate SmartWorld menu The results are displayed. For SmartWorld, the following menu is displayed. Note Item Description You can display the Functions screen by Hot &...
Page 141: Polaris Office
YouTube Polaris Office You can play YouTube videos or upload the videos you From the Home screen, "Applications" have shot to YouTube. X "Polaris Office" First-time users are required to accept "mobile terms The "Polaris Office" screen appears. of service". From the Home screen, "Applications"...