Advertisement
3. CERTIFICATION
All sizes of BRIGHT III have a German certification (Gütesiegel) DHV 1, made in
accordance with a new DHV 1 Standard.
BRIGHT III 24 under the number DHV GS-01-1543-06
BRIGHT III 26 under the number DHV GS-01-1484-06
BRIGHT III 28 under the number DHV GS-01-1485-06
BRIGHT III 30 under the number DHV GS-01-1486-06
All information of certificate DHV are written on a label in the front part of the
middle rib.
The Gütesiegel
harnesses enables a certain degree of adjustment to be made to the length of
the waist strap. 42 cm is the recommended distance between the carabiners.
The following point applies to the BRIGHT III in common with all other
paragliders. When loosened cross-bracing is used the pilot's weight shift control
is greater. The glider is also more sensitive to the movements in the surrounding
air. When the cross-bracing are tighter, the pilot feels subjectively more stable
but turning by weight-shifting is practically ineffectual.
NOTICE:
Paraglider BRIGHT III is constructed for hill or tow
launches. Use of subsidiary motor has not been tested for by the
manufacturer or by the DHV!
THIS GLIDER IS NOT MEANT FOR JUMPING FROM
A PLANE, BALLOON OR FOR JUMPS WITH
A BELATED OPENING OF THE CANOPY!
4. ADJUSTING YOUR GLIDER
Every BRIGHT III, before it is given to a customer, goes through a final
check-up and test-flight to verify that its characteristics and measurements
correspond to the manufacturer's specifications. You may only make
adjustments to the break line lengths or to the speed system of your BRIGHT III
and only then in keeping with the recommendations of this manual.
Other adjustments or changes to your BRIGHT III lead to a loss of
guarantee, airworthiness and validity of the Gütesiegel DHV – an amateur
modification may endanger yourself and other pilots. If you do have any
suggestions on improvements let us know and our test-pilots will try out your
ideas without risk to yourself.
is valid
for all
harnesses of
ABS type. This type of
Advertisement
Need help?
Do you have a question about the BRIGHT III and is the answer not in the manual?
Questions and answers