Chapter 1: Introduction - Linksys WRE54G User Manual

Chapter 1: Introduction

Welcome
WRE54G Wireless-G Range Expander is a standard WLAN repeater device. It can repeat and extend wireless signal
coverage on Linksys wireless AP/router.
Features
Supports 64 / 128 bit WEP encryption in 802.11b/802.11g wireless LAN.
Wireless operation provides data rate at 11, 5.5, 2, and 1Mbps with auto fallback for 802.11b WLAN card and also
provide rate at 6, 9, 12, 18, 24, 36, 48, and 54Mbps for 802.11g WLAN card.
Configurable through your networked PC's Web browser
Configurable through Setup Wizard
Backup and restore configuration
Support auto-configuration and infrastructure operation modes. Under auto-configuration operation mode, WRE54G
will detect and connect to the Linksys wireless AP/Router with strongest signal in the environment. Infrastructure
operation mode allows user configure the WRE54G via setup wizard.
Password protected configuration or management sessions for web access
Built-in HTTP Server for setup and management via any browser easily
Support 64/128 bit WEP encryption.