Do you have a question about the Serie C and is the answer not in the manual?
Questions and answers
Summary of Contents for O.M.A.C. Serie C
Page 1
Rev.1 del 05/2012 O.M.A.C. s.r.l. Technical Manual Positive displacement lobe pump Serie C - CF Translation of the original instructions all the power with a delicate touch T.M. C-CF Series rev.1 05/2012 All rights reserved O.M.A.C. S.R.L. RUBIERA (RE) - ITALY 8, Giovanni Falcone - 42048 Rubiera (RE) - Italy Tel.+39(0)522/629371 - 629923 Fax +39(0)522/628980...
Rev.1 del 05/2012 O.M.A.C. s.r.l. Summary Technical features of the C CF Series pump............................pag. 5 Curves of performance ..................................pag. 7-22 C100 with gear rotor in AISI 316L and standard tolerance (LI-ST) code 8 .............. pag. 7 C110 with 4-lobe rotor in AISI 316L and standard tolerance (LI-ST) code 0 ..............
Rev.1 del 05/2012 O.M.A.C. s.r.l. Technical features of the C CF Series pump The table below shows the nominal features of the various dimensions of the pumps. The data that make up the table refer to the pump model, the capacity that each pump model (100, 110...) elaborates every 100 revolutions, the maximum operation speed of each pump size, the differential operating pressure, expressed in bar, and the standard dimensions of the opening couplings, expressed in millimetres and inches.
Need help?
Do you have a question about the Serie C and is the answer not in the manual?
Questions and answers