GROUNDING INSTRUCTIONS This appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances.
INSTRUCTIONS DE MISE À LA TERRE Cet appareil doit être branché à une installation électrique munie d’un contact de mise à la terre. En cas de fonctionnement défectueux ou de panne, la mise à la terre assure un parcours sécuritaire de faible résistance pour le courant électrique, réduisant les risques de choc électrique.
power metal FAN CHAMBER The clear fan chamber attached to the underside of the base may be removed and cleaned. Remove the bottom metal plate and brush roll Removing and Emptying Cloth Bag belt from pulley. Remove the two screws on either side of the clear NOTE: Turn off all switches and unplug the electrical cord chamber, press the cam locks outward and lift the clear chamber from the base.
Page 7
PS1 Shoulder screw PS51 PS2 Adjustment knob PS3 Chrome hood PS50 PS4 Name plate PS49 PS5 ST4.8*20 screw PS48 PS6 Hood spring PS7 R.H. air duct PS47 PS8 Motor PS9 Fan washer PS46 PS10 Motor seal PS45 PS5 ST4.8*20 screw PS44 PS43 PS12 Front axle clamp assy...
Need help?
Do you have a question about the SR101 and is the answer not in the manual?
Questions and answers