Table of Contents
Advertisement
AES67 Practical Guide
O
SDP
E
PENING
DATA WITH
DITOR
The SDP data can now be copied (or saved) and used for setting up a connection to this stream at the
desired receiver.
2.4.4
Receiving an AES67 stream
Connecting to an existing AES67 stream requires inputting the SDP data of the respective stream to
the desired receiver. This can either be done manually or with support of a discovery & connection
management method.
2.4.4.1 Connecting to an AES67 stream with discovery support
If a common discovery method is supported by both the sender and receiver, connecting to a stream
should be as easy as identifying the desired stream in the receiver's user interface (usually by name)
and executing the connection function.
In the RVSC, hit open the Rx creation dialog ("Connect Rx Stream"):
Page 19 of 28
Advertisement
Table of Contents
