Samsung GALAXY S7 Repair Manual page 14

Tools: spudger, tweezers,
Isesamo or painters Knife
STEP 6
Disassemble the device
Tips: refer to step 7 before
starting step 6 •
Remove the motherboard once all components are disconnected.
•
Heat the front glass display using a constant motion around the
edge of the glass then use your painters knife or metal pry tool to
slide in between the frame of the phone and LCD. Take the tool and
slide the tip in between glass and frame of device.
•
As you slide in between use pry tool and flex from left to right to
help separate the adhesive.
•
Pay close attention to the bottom back and menu flex cables!