ST UM0532 User Manual
ST UM0532 User Manual

ST UM0532 User Manual

Adapter board for the lis302sg

Advertisement

UM0532
User manual
STEVAL-MKI020V1
adapter board for the LIS302SG

Introduction

The STEVAL-MKI020V1 is an adapter board designed to facilitate the evaluation of the
LIS302SG three-axis analog output linear accelerometer. The board offers an effective
solution for fast system prototyping and device evaluation directly within the user's own
application.
The STEVAL-MKI020V1can be plugged into a standard DIL 24 socket. The adapter
provides the complete LIS302SG pinout and comes ready-to-use with the required
decoupling capacitors on the Vdd power supply line.
The pinout of the adapter is fully compatible with all other available adapter boards, making
it possible to switch from one sensor to another easily during device evaluation without the
need for board redesign.
This user manual provides information on the STEVAL-MKI020V1 only. For details regarding
the LIS302SG specifications, please refer to the datasheet for the device.
June 2008
Rev 1
1/5
www.st.com
www.BDTIC.com/ST

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UM0532 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ST UM0532

  • Page 1 UM0532 User manual STEVAL-MKI020V1 adapter board for the LIS302SG Introduction The STEVAL-MKI020V1 is an adapter board designed to facilitate the evaluation of the LIS302SG three-axis analog output linear accelerometer. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application.
  • Page 2 Adapter board layout and pin description UM0532 Adapter board layout and pin description A photograph of the adapter board is shown in Figure 1, together with an illustration of the top silk-screen layer and the board layout. Figure 1. Adapter board photograph, top silk-screen layer and board layout Pin #1 In addition to the MEMS sensor, the adapter board includes two filtering capacitors (10 µF...
  • Page 3 UM0532 Schematic and connection diagram Schematic and connection diagram Figure 2. Schematic and connection diagram for the STEVAL-MKI020V1 10uF 100nF LIS302SG Rsvd Rsvd Aux_in Vout_mux VoutZ VoutY Header 12 Header 12 www.BDTIC.com/ST...
  • Page 4: Revision History

    Revision history UM0532 Revision history Table 2. Document revision history Date Revision Changes 24-June-2008 Initial release. www.BDTIC.com/ST...
  • Page 5 No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

Table of Contents