Table of Contents
Advertisement
Quick Links
MTX-HSPA-PH8-P+G
Our company network supports you worldwide with offices in Germany, Austria,
Switzerland, Great Britain and the USA. For more information please contact:
FORTEC Elektronik AG
Hauptniederlassung
Lechwiesenstr. 9
86899 Landsberg am Lech
Telefon:
+49 (0) 8191 91172-0
Telefax:
+49 (0) 8191 21770
E-Mail:
sales@fortecag.de
Internet:
www.fortecag.de
FORTEC Elektronik AG
Büro Wien
Nuschinggasse 12
A-1230 Wien
Telefon:
+43 1 8673492-0
Telefax:
+43 1 8673492-26
E-Mail:
office@fortec.at
Internet:
www.fortec.at
The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
Manual
Matrix Electrónica, S.L.
FORTEC Elektronik AG
Büro West
Hohenstaufenring 55
50674 Köln
Telefon:
+49 (0) 221 272 273-0
Telefax:
+49 (0) 221 272 273-10
E-Mail:
west@fortecag.de
Internet:
www.fortecag.de
ALTRAC AG
(Tochter der FORTEC):
Bahnhofstraße 3
CH-5436 Würenlos
Telefon:
+41 (0) 44 7446111
Telefax:
+41 (0) 44 7446161
E-Mail:
info@altrac.ch
Internet:
www.altrac.ch
Advertisement
Table of Contents
Summary of Contents for Fortec Star MTX-HSPA-PH8-P+G
- Page 1 Manual MTX-HSPA-PH8-P+G Matrix Electrónica, S.L. Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln...
- Page 2 MTX-HSPA-PH8-P+G MTX-HSPA-PH8-P+G User Manual www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 1 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
-
Page 3: General Notes
To contact customer support please use the contact details below: Matrix Electrónica Alejandro Sánchez, 109 28019 Madrid (SPAIN) gsmsupport@matrix.es Information about the MTX-HSPA-PH8-P+G product and its accessories is available on the following web site: www.mtxm2m.com Or contact your local distributor / sales agent. www.mtxm2m.com www.matrix.es... -
Page 4: Revision Information
MTX-HSPA-PH8-P+G Revision information Revision Date Author Changes 2014/01 First preliminary release New document format 2014/11 AEM/TP General and language revision www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 3 MTX Terminals® by MATRIX ELECTRONICA S.L.U... -
Page 5: Table Of Contents
MTX-HSPA-PH8-P+G Index General Notes .............................2 Important information ........................2 Service and Support ..........................2 Revision information ...........................3 Introduction ..........................7 Description ..........................7 Ordering information ......................8 Highlights ..........................9 Product label ........................11 Main features and services ....................12 1.5.1 Key features at a glance ..................... 12 1.5.2... - Page 6 Where to install the modem ....................46 8.1.1 Environmental conditions ..................46 8.1.2 Signal strength ......................46 8.1.3 Connections of components to MTX-HSPA-PH8-P+G Modem ........46 8.1.4 Network and subscription ..................46 How to install the modem ....................47 8.2.1 Power supply ......................47 8.2.2...
- Page 7 MTX-HSPA-PH8-P+G FCC Compliant ........................51 9.2.1 SAR information ......................51 Declaración de conformidad (Spanish)................... 52 10.1 Estándares de homologación europea ................52 10.2 Conformidad FCC ....................... 54 10.2.1 Tasa de absorción específica (SAR) ................54 Regulatory and type approval information ................55 11.1...
-
Page 8: Introduction
V.110, UMTS data rate 57.6 kpbs V.120) as well Short Messaging (SMS) and FAX specifications. It also has an analog interface and is capable of making voice communication calls. As a plus feature the MTX-HSPA-PH8-P+G adds a GPS receiver and NMEA protocol in the third multiplex channel (MUX GSM 07.10 protocol is needed). -
Page 9: Ordering Information
MTX-HSPA-PH8-P+G 1.2 Ordering information 199801098: MTX-HSPA-PH8+G Five-Band GSM 800/850/AWS1700/1900/2100MHz 1xRS232, USB, receiver 199801308: MTX-HSPA-PH8-P+G Five-Band GSM 800/850/900/1900/2100MHz 1xRS232, USB, GPS receiver www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 8 MTX Terminals® by MATRIX ELECTRONICA S.L.U... -
Page 10: Highlights
General features MTX-HSPA-PH8+G bands o UMTS/HSPA+: Five-Band 800/850/AWS1700/1900/2100MHz o GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz MTX-HSPA-PH8-P+G bands o UMTS/HSPA+: Five-Band 800/850/900/1900/2100MHz o GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz EDGE multi-slot class 12 UMTS/HSPA+ 3GPP Release 6, 7, GSM/GPRS/EDGE 3GPP release 99 ... - Page 11 MTX-HSPA-PH8-P+G o DL speed: max 85.6kbps o UL speed: max 85.6kbps o Mobile station class B o Full PBCCH support o Coding schemes CS 1-4 CSD data transmission o GSM data rate 14.4kbps V.110 o Point-to-point MO and MT...
-
Page 12: Product Label
MTX-HSPA-PH8-P+G 1.4 Product label The label fixed to the bottom of a MTX Modem comprises the following information: Information MTX M2M logo Product name (model) Product ordering number Hardware and Firmware Revisions FCC ID Year/Week of fabrication Barcode (Code 128) (IMEI) -
Page 13: Main Features And Services
The MTX-HSPA-PH8-P+G modem performs a set of telecom services (TS) according to GSM standard phase 2+, ETSI and ITU-T. The services and functions of the MTX-HSPA-PH8-P+G are implemented by issuing customized applications embedded on the device, by AT commands issued internally or over the USB, RS232 or RS485 interface. - Page 14 MTX-HSPA-PH8-P+G GSM / GPRS / EGPRS features Data transfer GPRS Multislot Class 12 Full PBCCH support Mobile Station Class B Coding Scheme 1 – 4 EGPRS Multislot Class 12 EDGE E2 power class for 8 PSK ...
- Page 15 MTX-HSPA-PH8-P+G Power on/off, Reset Power on/off Automatic switch-on at power supply Switch off by AT command Switch off by hardware signal TURN_OFF Automatic switch-off in case of critical temperature or voltage conditions Software Reset Orderly shutdown and reset by AT command...
-
Page 16: Operating Modes
MTX-HSPA-PH8-P+G 1.5.2 Operating modes The table below briefly summarizes the various operating modes referred to in the following chapters. Limits Function Normal operation GSM / GPRS / Power saving automatically activated when no calls are in progress, the UMTS / HSPA SLEEP... -
Page 17: Power Consumption
MTX-HSPA-PH8-P+G 1.5.3 Power Consumption It is recommended to use 12V/1.5A power supply. Description Conditions Min Typ Max Unit OFF State supply POWER DOWN current Average GSM / GPRS IDLE (USB disconnected, UART active) @ DRX=2 supply current IDLE (USB active) @ DRX=2 (GNSS off) Voice Call GSM850/900;... - Page 18 MTX-HSPA-PH8-P+G GPRS Data transfer GSM1800/1900; PCL=0; ROPR=8 2Tx/3Rx (max. reduction) ROPR=4 (no reduction) GPRS Data transfer GSM1800/1900; PCL=0; ROPR=8 4Tx/1Rx (max. reduction) ROPR=4 (no reduction) EDGE Data transfer GSM1800/1900; PCL=0; ROPR=8 1Tx/4Rx (max. reduction) ROPR=4 (no reduction) EDGE Data transfer GSM1800/1900; PCL=0;...
- Page 19 Communication tester settings: no neighbor cells, no cell reselection etc., RMC (reference measurement channel) At total mismatch One fix per second AWS UMTS/HSPA+ band IV supported by MTX-HSPA-PH8+G only 900MHz UMTS/HSPA+ band VII supported by MTX-HSPA-PH8-P+G only www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 18 MTX Terminals®...
-
Page 20: Rf Antenna Interface Description
MTX-HSPA-PH8-P+G 1.5.4 RF antenna interface description The table below briefly summarizes the RF Antenna interface GSM/UMTS Parameter Conditions Min. Typical Max. Unit UMTS/HSPA connectivity Band I, II, IV, V, VI, VIII Receiver Input Sensitivity @ ARP UMTS 800/850 Band VI/V -104.7/-... - Page 21 MTX-HSPA-PH8-P+G GSM 1800 / GSM 1900 GPRS, 2 TX GSM 850 / E-GSM 900 GSM 1800 / GSM 1900 EDGE, 2 TX GSM 850 / E-GSM 900 GSM 1800 / GSM 1900 GPRS, 3 TX GSM 850 / E-GSM 900...
-
Page 22: Sim Card
1.8V SIM technology is supported. Older 5V SIM technology is not supported. 1.6 Precautions MTX-HSPA-PH8-P+G as a standalone item is designed for indoor use only. For outdoor use it must be integrated into a weatherproof enclosure. Do not exceed the environmental and electrical limits as specified in Technical Data www.mtxm2m.com... -
Page 23: Block Diagram
MTX-HSPA-PH8-P+G 1.7 Block diagram The base MTX-HSPA-PH8-P+G modem’s block diagram is shown in the following figure: 1.8 Hardware revisions Base MTX-HSPA-PH8-P+G and MTX-HSPA-PH8-P+G models Hardware Revision Starting production date Changes 2.03 01/2014 Initial version www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 22... -
Page 24: Mechanical Description
MTX-HSPA-PH8-P+G 2. Mechanical description 2.1 Overview The pictures below show the mechanical design of the modem along with the positions of the different connectors and mounting holes. The modem case is made of durable PC/ABS plastic. Bi-color Led Indicator SIM Card Reader... -
Page 25: Dimensions
MTX-HSPA-PH8-P+G 2.2 Dimensions All dimensions are in millimeters www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 24 MTX Terminals® by MATRIX ELECTRONICA S.L.U... - Page 26 MTX-HSPA-PH8-P+G All dimensions are in millimeters www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 25 MTX Terminals® by MATRIX ELECTRONICA S.L.U...
-
Page 27: Electrical And Environmental Characteristics
MTX-HSPA-PH8-P+G 3. Electrical and environmental characteristics 3.1 Electrical specifications 3.1.1 Power supply ABSOLUTE MAXIMUM RATINGS Symbol Parameter Conditions Min. Max. Unit Supply voltage CHARACTERISTICS Symbol Parameter Conditions Min. Typ. Max. Unit Supply voltage Maximum Recommended Supply current ƞ Efficiency VIN=12V, IIN=2A, 25ºC... -
Page 28: Audio Interface
MTX-HSPA-PH8-P+G 3.1.3 Audio interface ABSOLUTE MAXIMUM RATINGS Symbol Parameter Conditions Min. Max. Unit Input voltage -0.3 CHARACTERISTICS Symbol Parameter Conditions Min. Typ. Max. Unit Output Audio output differential voltage Audio mode 5, Outstep 4, no load, minimum differential load 7.5Ω... -
Page 29: Operating Temperatures
MTX-HSPA-PH8-P+G 3.2 Operating temperatures Please note that the modem’s lifeti e, i.e., the MTTF ea ti e to failu e e edu ed if operated outside the extended temperature range. Parameter Unit Normal operation °C Extended operation °C Automatic shutdown <-40... -
Page 30: Storage Conditions
MTX-HSPA-PH8-P+G 3.3 Storage conditions The conditions stated below are only valid for modems in their original packed state in weather protected, non-temperature-controlled storage locations. Normal storage time under these conditions is a maximum of 12 months. The modems will be delivered in a packaging that meets the e ui e e ts a o di g IPD/JEDEC J-STD-033B.1 fo Lo Te pe atu e Ca ie s. -
Page 31: Interface Description
MTX-HSPA-PH8-P+G 4. Interface description All electrical connections to the modem are protected in compliance with the standard air and contact Electrostatic Discharge (ESD). The modem family uses the following industry standard connectors: USB mini connector DB9 female (main RS232 port) ... -
Page 32: Power Supply Connector
12V DC power supply. The power supply has to be a single voltage source capable of providing a current peak during an active transmission. The uplink burst causes strong ripples (drop) on the power lines. By default, the MTX-HSPA-PH8-P+G will automatically switch on when power supply is applied at PIN 1 and PIN 6. Signal... -
Page 33: Mini Usb Connector
This is because MTX-HSPA-PH8-P+G is designed as a self powered device compliant with the U i ersal “erial Bus “pecificatio Re isio 2.0 . The MTX-HSPA-PH8-P+G cannot be powered by a USB port. If you need this feature, contact gsmsupport@matrix.es. Only modems that have a mounted internal Li-Po battery (-BAT) can operate with USB power voltage. -
Page 34: Db9 Connector: Rs232 Port
It is connected to the modem’s ASC0 main port using a level shifter converter. The MTX-HSPA-PH8-P+G modem is designed to be used as a DCE (data circuit-terminating equipment). Based on the conventions for DCE-DTE connections, it communicates with the customer application (DTE- data terminating equipment) using the following signals: ... - Page 35 The default configuration is 8 data bits, no parity and 1 stop bit. The setting can be changed using the AT command AT+ICF and, if required, AT^STPB. ASC0 can be operated at fixed bit rates from 1200bps to 921600bps. The default serial speed for MTX-HSPA-PH8-P+G is 115200bps. www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 34...
-
Page 36: Audio Connector
For electret microphones a supply source is implemented The MTX-HSPA-PH8-P+G is pre-configured to work with a range of handsets, the audio interface is flexible and its performance can be configured, using AT commands, to match a particular handset or audio subsystem ... - Page 37 When shipped from the factory, all audio parameters of MTX-HSPA-PH8-P+G are set to interface 1 and audio mode 1. This is the default configuration optimized for the Votronic HH-SI-30.3/V1.1/0 handset and used for type approving the MTX Modems’...
-
Page 38: Gsm/Gprs/Umts Antenna Connector
DC-power consumption, modulation accuracy and harmonic suppression. 4.6 SIM card reader The MTX-HSPA-PH8-P+G modem is fitted with a SIM card reader designed for 1.8V and 3V SIM cards. It is the flip-up type which is lockable in the horizontal position and is accessed through a removable panel as shown below. -
Page 39: Gps Antenna Connector
MTX-HSPA-PH8-P+G 4.7 GPS The MTX-HSPA-PH8-P+G integrates a GNSS receiver that offers the full performance of GPS/GLONASS technology. The GNSS receiver is able to continuously track all GPS/GLONASS satellites in view, thus providing accurate satellite position data. The integrated GNSS receiver supports the NMEA protocol via USB or RS232 interfaces. NMEA is a combined electrical and data specification for communication between various (marine) electronic devices including GNSS receivers. -
Page 40: Firmware Updates
MTX-HSPA-PH8-P+G 4.8 Firmware updates It is possible and sometimes necessary to update the MTX-HSPA-PH8-P+G firmware. Updates must be carried out by an approved technician. Please contact gsmsupport@matrix.es for details regarding Service/Programming. www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 39 MTX Terminals® by MATRIX ELECTRONICA S.L.U... -
Page 41: Operation
MTX-HSPA-PH8-P+G 5. Operation 5.1 Switching on the modem. New Automatic restart after shutdown feature There is no special way to turn the modem on: just apply power to the VIN terminal via a power connector (see Section 4.1). The modem will be fully operational after 4 to 9 seconds. Logging onto a et o k a take lo ge tha this a d is out of the ode ’s o t ol. -
Page 42: Status Leds
500ms OFF 990ms OFF 990 ms OFF The red color LED is connected to the GPIO5 in the MTX-HSPA-PH8-P+G. This allows the user to define the functionality of this LED by issuing AT commands. www.mtxm2m.com www.matrix.es 2014/11 v2.0 Page 41 MTX Terminals®... -
Page 43: At Command Interpreter
+++ and ATO, as well as switching back and forth between command and online mode when working on one interface only. See the MTX-HSPA-PH8-P+G Quick Start guide for a complete step by step installation process. www.mtxm2m.com www.matrix.es 2014/11 v2.0... -
Page 44: Safety And Product Care
7.2 General precautions The MTX-HSPA-PH8-P+G Modem as a standalone item is designed for indoor use only. For outdoor use it must be integrated into a weatherproof enclosure. Do not exceed the environmental and ele t i al li its as spe ified i Te h i al Data . -
Page 45: Sim Card Precautions
MTX-HSPA-PH8-P+G • In order to provide strain relief and to avoid transmitting excessive vibration to the modem during installation, all cables connected to the MTX-HSPA-PH8-P+G Modem must be secured or clamped immediately adjacent to the modem's connectors. • To protect the power supply cables, and in order to comply with fire safety requirements, when the unit is powered from a battery or a high current supply, a fast 1.25A fuse should be... -
Page 46: Radio Frequency (Rf) Exposure And Sar
20cm from the body. In all other configurations the user is responsible for meeting the local SAR regulations. Users of the MTX-HSPA-PH8-P+G wireless modem device are responsible for ensuring that they meet the SAR regulatory requirements of the countries in which they intend to operate the device and that their documentation contains the relevant SAR declaration, certification information and user guidance as appropriate. -
Page 47: Modem Installation
MTX-HSPA-PH8-P+G 8. Modem installation This chapter gives you advice and helpful hints on how to integrate the MTX-HSPA-PH8-P+G Modem into your application from a hardware perspective. 8.1 Where to install the modem There are several conditions which need to be taken into consideration when designing your application as they might affect the modem and its function. -
Page 48: How To Install The Modem
Where access is restricted, it may be easier to connect all the cables to the modem prior to securing it in the application. • Securely attach the MTX-HSPA-PH8-P+G Modem modem to the host application using two 3mm diameter pan-head screws 8.3 Antenna 8.3.1 General... -
Page 49: Antenna Placement
MTX-HSPA-PH8-P+G 8.3.3 Antenna placement The antenna should be placed away from electronic devices and other antennas. The recommended minimum distance between adjacent antennas, operating in a similar radio frequency band, is at least 50cm. If the signal strength is weak, it is useful to face a directional antenna towards the closest adio ase statio . -
Page 50: Conformity Assessment
28019 Madrid Spain 9.1 Standards of European Type Approval We declare under our sole responsibility that the products MTX-HSPA-PH8-P+G Modem 0 containing Cellular Engine Cinterion engine PH8 (Type S30960-N1055-A200), to which this declaration relates, are labeled with the CE conformity mark. - Page 51 MTX-HSPA-PH8-P+G ETSI EN 301 908-02 V5.2.1: Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive...
-
Page 52: Fcc Compliant
MTX-HSPA-PH8-P+G 9.2 FCC Compliant MTX-HSPA-PH8-P+G and any variants contain FCC ID: QIPPH8. The FCC Equipment Authorization Certification for the PH8 Module is listed under the FCC identifier QIPPH8 Industry Canada Certification Number: 7830A-PH8 granted to Gemalto M2M GmbH. The Cinterion reference application of the PH8 Module registered under the above identifier is certified to be in accordance with the following Rules and Regulations of the Federal Communications Commission (FCC). -
Page 53: Declaración De Conformidad (Spanish)
Spain 10.1 Estándares de homologación europea Declaramos bajo nuestra responsabilidad que los productos MTX-HSPA-PH8-P+G que contienen un modulo celular Cinterion PH8 (Tipo S30960-N1055-A200), al cual se refiere esta declaración, están etiquetados con el marcado CE de conformidad. DIRECTIVA 2004/108/EC DEL PARLAMENTO EUROPE Y DEL CONSEJO del 15 de Diciembre de 2004 sobre la aproximación de las leyes de los Estados Miembros correspondientes a la compatibilidad... - Page 54 MTX-HSPA-PH8-P+G ETSI EN 301 908-02 V5.2.1: Cuestiones sobre Compatibilidad Electromagnética y espectro Radioeléctricos (ERM); estaciones base (BS) y equipamiento de usuario (UE) para redes celulares IMT-2000 de tercera generación; Parte 2: Normativa europea armonizada para IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) que cubre los requisitos esenciales del artículo 3.2 de la directiva R&TTE...
-
Page 55: Conformidad Fcc
MTX-HSPA-PH8-P+G 10.2 Conformidad FCC MTX-HSPA-PH8-P+G y todas sus variantes contienen el FCC ID: QIPPH8. El Certificado de Autorización de Equipo de la FCC para el módulo EHS6 está listado con el identificador FCC QIPPH8 Número de Certificación de Industria en Canadá: 7830A-PH8 asignado a Gemalto M2M GmbH. -
Page 56: Regulatory And Type Approval Information
11. Regulatory and type approval information 11.1 Directives and standards The MTX-HSPA-PH8-P+G modem has been designed to comply with the directives and standards listed below. It is the responsibility of the application manufacturer to ensure compliance of the final product with all provisions of the applicable directives and standards, as well as with the technical specifications provided in this document. - Page 57 MTX-HSPA-PH8-P+G EN 301 908-01 V3.2.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS) and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements of article 3.2 of the R&TTE Directive EN 301 908-02 V3.2.1...
-
Page 58: Sar Requirements Specific To Portable Mobiles
11.3 SELV requirements The power supply connected to the MTX-HSPA-PH8-P+G modem shall be in compliance with the SELV requirements defined in EN 60950-1. www.mtxm2m.com www.matrix.es 2014/11 v2.0... -
Page 59: Rohs Statement
MTX-HSPA-PH8-P+G 12. RoHS Statement The MTX-HSPA-PH8-P+G modem is compliant with the 2002/95/EC Directive of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). -
Page 60: Abbreviations
MTX-HSPA-PH8-P+G 14. Abbreviations Abbreviation Description Analog-to-digital converter Automatic Gain Control ANSI American National Standards Institute ARFCN Absolute Radio Frequency Channel Number Antenna Reference Point ASC0/ASC1 Asynchronous Controller. Abbreviations used for first and second serial interface of EHS6 Thermistor Constant Bit Error Rate... - Page 61 MTX-HSPA-PH8-P+G Full Rate GMSK Gaussian Minimum Shift Keying GPIO General Purpose Input/Output GPRS General Packet Radio Service Global Standard for Mobile Communications High Impedance Half Rate HSDPA High Speed Downlink Packet Access Input/Output Integrated Circuit IMEI International Mobile Equipment Identity...
- Page 62 MTX-HSPA-PH8-P+G Pull Up resistor (appr. 100k) Pulse Width Modulation Quadrature Amplitude Modulation R&TTE Radio and Telecommunication Terminal Equipment Random Access Memory Radio Frequency Radio Link Stability Root Mean Square (value) RoHS Restriction of the use of certain hazardous substances in electrical and electronic equipment.
-
Page 63: At Command Summary
The command line consists of a string of alphanumeric characters. It is sent to the MTX-HSPA-PH8- P+G to instruct it to perform the commands specified by the characters. The AT commands listed below are supported from within the MTX-HSPA-PH8-P+G. The AT Command Set manual can be downloaded from the MTX-HSPA-PH8-P+G web page at www.mtxm2m.com. - Page 64 MTX-HSPA-PH8-P+G AT+CHLD Call Hold and Multiparty AT+CHUP Hang up call AT+CIMI Request International Mobile Subscriber Identity (IMSI) AT+CLCC List of current calls AT+CLCK Facility Lock AT+CLIP Calling Line Identification Presentation AT+CLIR Calling Line Identification Restriction AT+CMEE Error Message Format AT+CMGC...
- Page 65 MTX-HSPA-PH8-P+G AT+CSMP Set SMS Text Mode Parameters AT+CSMS Select Message Service AT+CSQ Signal quality AT+CSSN Supplementary service notifications AT+CSTA Select type of address AT+CUSD Unstructured Supplementary Service Data AT+ES Synchronous Data Mode Configuration AT+ESA Synchronous Access Mode Configuration AT+GCAP Capabilities List...
- Page 66 MTX-HSPA-PH8-P+G AT^SISX Internet Service Execution AT^SLCC Extended list of current calls AT^SLED LED Feature AT^SMGL List Short Messages from preferred store without setting status to REC READ AT^SMONI Monitor the serving cell AT^SMONP Monitor neighbour cells AT^SMSO Switch Off PH8-P...
- Page 67 MTX-HSPA-PH8-P+G AT^SSTR SAT Response - Get Input (35) AT^SSTR SAT Response - Select Item (36) AT^SSTR SAT Response - Setup Menu (37) AT^SSTR SAT Response - Set Up Idle Mode Text (40) AT^SSTR SAT Response - Language Notification (53) AT^SSTR...
-
Page 68: Accessories
MTX-HSPA-PH8-P+G 16. Accessories The MTX-HSPA-PH8-P+G has a wide range of available accessories, including: Power supplies All type of antennas (indoo , outdoo , high gai , et … Cables and DIN adapters The MTX-HSPA-PH8-P+G is shipped without any accessories. -
Page 69: Sales Contact
MTX-HSPA-PH8-P+G 17. Sales contact www.mtxm2m.com Matrix Madrid Matrix Barcelona Matrix Bilbao Matrix Valencia Matrix Electrónica S.L. Matrix Electrónica S.L. Matrix Electrónica S.L. Matrix Electrónica S.L. C/ Alejandro Sánchez, 109 Ctra. Rubí a Sabadell Km 13 Pol. Aliendalde, 11 Valencia (SPAIN) - Page 70 Our company network supports you worldwide with offices in Germany, Austria, Switzerland, Great Britain and the USA. For more information please contact: FORTEC Elektronik AG FORTEC Elektronik AG Hauptniederlassung Büro West Lechwiesenstr. 9 Hohenstaufenring 55 86899 Landsberg am Lech 50674 Köln Telefon: +49 (0) 8191 91172-0 Telefon:...