Table of Contents
Advertisement
thumbs and fingers encircling the chain
saw handles, with both hands on the saw,
and with your body and arm in position
that allows you to resist kickback forces.
You can control kickback forces if proper precautions
are taken. Do not let go of the chain saw!
•
Do not overreach and do not cut above
shoulder height. This helps prevent unintended
tip contact and enables better control of the chain saw
in unexpected situations.
5. Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
ensures that the safety of the power tool is maintained.
6. Battery Safety
A. Do not charge the power tool in rain or in wet locations.
B. Do not use a battery-operated power tool in the rain.
C. Use only the following type and size of battery(ies): Toro
battery Model 88540 or 88541 and battery charger
Model 88542.
D. Remove or disconnect the battery before servicing, cleaning,
or removing material from the power tool.
E. Do not dispose of the battery in a fire; the cell may
explode. Check with local codes for possible special disposal
instructions.
F. Do not open or mutilate the battery. Released electrolyte
is corrosive and may cause damage to the eyes or skin. It
may be toxic if swallowed.
G. Do not open or mutilate the battery. Released electrolyte is
flammable and can cause damage if exposed to fire.
H. Exercise care in handling batteries to prevent shorting the
battery with conducting materials such as rings, bracelets,
and keys. The battery or conductor may overheat and cause
burns.
I. The ideal charging temperature is 0°C to 50°C (32°F
to 122°F). Charging outside of this temperature range
increases the charging time.
SAVE THESE INSTRUCTIONS
SUPERCEDED
4
Advertisement
Table of Contents
