Cisco MDS 9000 Installation And Configuration Note page 21

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Choose Performance > Traffic Analyzer. You see a summary table of all SPAN destination ports and
Step 1
configured Traffic Analyzers in your fabric.
Navigate to the fabric where you want to rediscover instances of Traffic Analyzer from the navigation
Step 2
bar.
Set Search on Subnet to the subnet that you want to rediscover.
Step 3
Click Rediscover to find instances of Traffic Analyzer within the selected fabric or VSAN and subnet.
Step 4
Note
Accessing Cisco Traffic Analyzer from Fabric Manager Web Services
To access an instance of Cisco Traffic Analyzer running in your fabric from Fabric Manager Web
Services, follow these steps:
Step 1 Choose Performance > Traffic Analyzer. You see a summary table of all SPAN destination ports and
configured Traffic Analyzers in your fabric. The source column shows the ports that are monitored by
the SPAN destination port.
Click a Traffic Analyzer to launch that Traffic Analyzer within Fabric Manager Web Services.
Step 2
If you did not configure the switch and switch port information in Cisco Traffic Analyzer, you can still
discover it, but Fabric Manager Web Services cannot associate that instance of Cisco Traffic Analyzer
with any fabric. Cisco Traffic Analyzer also cannot inherit the device alias information from Fabric
Manager Web Services.
Fabric Manager Web Services updates Cisco Traffic Analyzer with the latest device alias information
every five minutes.
Configuring Cisco Traffic Analyzer for Fabric Manager Releases Prior to 2.1(2)
To configure Performance Manager to work with Cisco Traffic Analyzer for Fabric Manager releases
prior to Release 2.1(2), follow these steps:
Step 1 Get the following three pieces of information:
•
•
•
Step 2 Start Cisco Traffic Analyzer.
a.
b.
OL-9077-01
Fabric Manager Web Services can only detect instances of Traffic Analyzer that use port 3000.
The IP address of the management workstation on which you are running Performance Manager and
Cisco Traffic Analyzer.
The path to the directory where Cisco Traffic Analyzer is installed.
The port that is used by Cisco Traffic Analyzer (the default is 3000).
Choose Performance > Traffic Analyzer > Open.
Enter the URL for Cisco Traffic Analyzer, in the format
Cisco MDS 9000 Family Port Analyzer Adapter Installation and Configuration Note
Using Cisco Traffic Analyzer with Fabric Manager Web Services
21