Rf Part; Test Conditions - Pantech PG-3210 Service Manual

PG-3210 Service Manual

6.5 RF Part

6.5.1 Test conditions

1. Test condition 1 : VBAT = 3.8V during all tests
2. Test condition 2 : Traffic channel :GSM850 Band
Tx mode
Ch190
Power Level : 13
3. Test condition 3 : Traffic channel : DCS Band
Tx mode
Ch698
Power Level : 10
4. Test condition 3 : Traffic channel : PCS Band
Tx mode
Ch662
Power Level : 10
5. Test condition 4 : Traffic channel :GSM850 Band
Rx mode
Ch190
Input power : -70dBm
6. Test condition 5 : Traffic channel : DCS Band
Rx mode
Ch698
Input power : -70dBm
7. Test condition 5 : Traffic channel : PCS Band
Rx mode
Ch662
Input power : -70dBm
8. RF power values are measured using 50Ωcoaxial cable.
1
PANTECH