Using The Vacuum Cleaner - Defy VC 4320 BN Instruction Manual

Using the vacuum cleaner

2
Attaching/removing the hose
To attach the hose (15), push the hose cap
(14) to match it with the slot (a click sound
will be heard).
Projecting parts on the hose cap should be
aligned correspondingly.
To remove the hose (15), press the
unlocking buttons on the sides of the hose
cap (14) and pull the hose.
Attaching/removing the telescopic tube
1. Attach the telescopic tube (3) to the
handle (1).
2. Pull the telescopic tube (3) from the
handle (1) to remove it.
3. To adjust the length of the telescopic
tube, push the telescopic tube adjustment
latch (4) in the arrow direction and pull it
from the end of it.
Attaching/removing the parquet/carpet
brush
1. Attach the telescopic tube (3) to the
parquet/ carpet brush (5).
2. Pull the telescopic tube (3) from the
parquet/ carpet brush (5) to remove it.
Adjusting the parquet/carpet brush
1. By pressing the adjustment latch located
on the parquet carpet brush (5);
2. Use position for hard floors and
parquet.
Use
carpets.
parquet.
The manufacturer strives for
continuous improvement. For
this reason, the text and
illustrations in this manual are
subject to change without notice.
If the appliance is damaged in
any way do not use it. Report the
damage to your dealer who will
take the necessary corrective
action.
Page 5
position for rugs and