Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Iberwave RTS200
- Page 1 RTS200 Hardware Manual IBERWAVE...
- Page 2 Iberwave Ingeniería SLL C/ Ronda de Poniente 4-2ºG • Tres Cantos 28760. MADRID Teléfono (91) 8060606 • Fax (91) 8060606 Document Info DOCUMENT NAME RTS200 DESCRIPTION RTS200 hardware description. FILE NAME rts200 hardware manual.odt CODE 001.0038 VERSION STATUS Draft CREATED BY...
-
Page 3: Table Of Contents
3 INTERFACES..............................7 3.1 RS232................................7 3.2 In/Out................................7 3.3 Vdc Power IN..............................8 3.4 Ethernet................................. 8 3.5 Input Port Structure............................8 3.6 Output Port Structure............................. 9 3.7 RF connections............................. 9 4 ANTENNAS............................... 10 Pag: 3 Document: RTS200 Code: 001.0038 Version: 1... -
Page 4: Introduction
1 I n t r o d u c t i o n The RTS200 combines a HF / UHF RFID reader and a powerful set of virtual instruments (RF Generator, Spectrum analyser) to provide a complete RFID tester, suitable for both laboratory and production line test of RFID passive tags. -
Page 5: Mechanical
2 . 1 F r o n t C o n n e c t i o n s There are two coaxial connectors at the front of the unit, for the Reception (Green) and Transmission (Red) antenna sections. Pag: 5 Document: RTS200 Code: 001.0038 Version: 1... -
Page 6: Rear Connections
RS232 Serial Port host interface RS232 Digital interface with the machine for production environments In/Out 1 USB host interface Power supply input Vdc Power In 10 Base-T connector for ETHERNET based interface Ethernet Pag: 6 Document: RTS200 Code: 001.0038 Version: 1... - Page 7 3 . 1 R S 2 3 2 This is a Miniature DIN, female 6 way connector. Signal Notes Not Connected TXDAT RS232 Output from RTS200 to Host RXDAT RS232 Input from Host to RTS200 DGND GND reference 3 . 2 I n / O u t This is a Miniature DIN, female 8 way connector.
-
Page 8: Input Port Structure
Delayed Result Same as result, delayed by a number of triggers See the I/O port structure section for a description of the hardware interface, and the RTS200 User´s guide for the description of the operation and configuration of these signals. -
Page 9: Output Port Structure
The TX cable and connector are always marked RED, while the RX cable and connector are marked GREEN for easy identification. For best results, the antenna models HTP200, UTP200 and LTP100 have to be connected directly to the RTS200 (not using cables), by means of SMA-SMA transitions (tubes) provided with the antennas. Pag: 9 Document: RTS200 Code: 001.0038... -
Page 10: Antennas
Calibrated Yes* Enclosure Size 10x10cm 10x10cm 9x6cm 9x6cm 9x6cm Application Production line Production line Production line Production line Production line (inlays, labels) (inlays, labels), inspection, inspection, inspection, laboratory laboratory laboratory laboratory Pag: 10 Document: RTS200 Code: 001.0038 Version: 1...