1. Manuals
  2. Brands
  3. Knox Manuals
  4. Accessories
  5. 3D Printing Pen
  6. Instruction manual

Knox 3D Printing Pen Instruction Manual

Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

Knox 3D Printing Pen Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3D Printing Pen and is the answer not in the manual?

Questions and answers

Summary of Contents for Knox 3D Printing Pen

  • Page 1 Knox 3D Printing Pen Instruction Manual...

  • Page 2: Box Contents

    Thank you for purchasing the Knox 3D Printing Pen. In order to have a fun and safe time making your 3D ideas come to life, please read the following information carefully. Box Contents • Knox 3D Printing Pen • Pen Holder •...

  • Page 3: Operating Instructions

    Operating Instructions General Operation 1. Plug in 3D printing pen to an outlet. A yellow LED light will illuminate showing the pen is in “service mode”. 2. The LCD display will show “PLA” or “ABS”. Select the value that matches the type of filament you have.
  • Page 4 Changing Filaments Changing Color – Same Filament Type Press the retract button for a few seconds and then pull out the unused filament. Insert • the new filament and repeat Step 5 above. Changing ABS-to-PLA Press the retract button for a few seconds and remove the unused ABS filament. •...

  • Page 5: Troubleshooting

    Troubleshooting Beep Sound Pen is overheated. Lower temperature. Plastic is Bubbling Temperature is too hot. Lower temperature. Plastic is Colorless and/or Hard to Extrude Temperature is too low. Raise temperature. Specifications • Extrusion Mode – Melting • Material Compatibility – ABS or PLA •...

Table of Contents