Related Manuals for Zendure A5
Summary of Contents for Zendure A5
- Page 1 15,000 Product Information Guide Please read this carefully before you use the product. Please keep this manual for future reference.
-
Page 2: Compatible Devices
> Highly durable (hard exterior reinforced w/ support ridges, shock absorbing rubber belt) > Energy efficient (80% total energy conversion rate) for maximum use of listed capacity > Charge other devices while Zendure A-Series is being charged > Turns itself on automatically when connected to compatible devices >... - Page 3 > Using your Zendure A-series to charge other devices Connect one end of the included USB cable or other USB cable to the USB output port on your Zendure. Connect the other end of a USB charging cable to the charging port on your compatible device, using an appropriate adaptor if necessary.
-
Page 4: Charging Devices
> Checking your Zendure’s remaining charge If your Zendure’s status lights are not already lit, press the power button briefly. If the lights still do not turn on, your Zendure has no charge remaining. The status lights on your Zendure will indicate your A4’s remaining charge. - Page 5 Zendure will be charged at what's left. For instance, if the output is 0.5A, Zendure will be charged at 1.5A; if the output is 1A, Zendure will be charged at 1A; if the output is 1.5A, Zendure will be charged at 0.5A; but if the total output exceeds 1.5A, Zendure will not be charged until the other devices stop asking for additional power.
-
Page 6: Troubleshooting
1. Disconnect all cables and devices from your Zendure. 2. If your Zendure is wet, dry it thoroughly with a cloth. If there is moisture in the USB ports, allow the Zendure to dry thoroughly. Do not place fingers or a foreign object inside your Zendure’s ports to expedite drying.
Need help?
Do you have a question about the A5 and is the answer not in the manual?
Questions and answers