Rear Seat Infotainment - Cadillac CT6 User Experience

Table of Contents

Advertisement

30

REAR SEAT INFOTAINMENT

Rear Seat Infotainment
Rear Seat Infotainment
(RSI) System
If equipped, the system includes a
Blu-ray/DVD/CD player, two USB
ports, HDMI/MHL input, two wireless
headphones, and a remote control.
The remote control is used to select
the same or a different source for each
screen from the rear seats.
Video can be viewed from the front by
touching VIDEO on the Home Page,
if the vehicle is in P (Park). Audio will
be heard over the speakers. If another
icon is selected, the video on the rear
screen will continue to play but the
audio on the speakers will change to
the source selected.
To resume play of the video where it
left off, Pseudo Resume must be on.
See Player Setup BD/DVD" later in
this section.
The RSI system may not operate
properly until the temperature is
above 20 °C ( 4 °F) and below
55 °C (131 °F).
System Operation
The video screens are in the back of
the driver and front passenger seats.
To use:
1. Slide the screen switch left or
right on the remote control for
the desired screen.
2. Press power on the remote
control to raise and turn on the
video display.
If Remember Status has been
selected in the menu, the screens
will return to the same position
when the vehicle was turned off.
3. Select Screen Tilt from any menu
to move the screen viewing
position.
The screen will always return to
the selected position until a new
position is selected.
The system can also be turned on
from the front infotainment system by
touching VIDEO on the Home Page
and then touching On/Off.
The screens lower automatically when
the vehicle is turned off.
If RSI audio is desired without video
being displayed, go to the Settings
Menu and select Display Off. The
display will turn back on with the
press of any option on the remote.
Caution
Avoid directly touching the video
screen, as damage may occur.
Sources
Sources include AM, FM, SXM (if
equipped), HDMI/MHL, CD/DVD/
Blu-Ray, and USB.
Menus and Features
AM/FM Menu
{
Press
(Home) on the remote
control, select RADIO, then select AM
or FM.
y
Press
(Menu) to select All Strong
Stations, All Stations, Favorites,
Categories, Wired Headphones,
or other RSI functions.
Only one tuner source may be active
at a time.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2018

Table of Contents