Safety; Care And Maintenance; Tools Required For Assembly - Rack furniture CHARLESTON LOFT BED Instruction Manual

Safety First: Ensure that the top mattress fitted to this bed is no higher than the warning
label attached to the safety rail assembly. IE: 6.30in (160mm) below the top of the safety rails.
Please note: Top bed is not recommended for children under six (6) years old.
Allowing children to play on or below the beds is dangerous and jumping under any
!
circumstances should be prohibited!
The ladder is provided to allow easy access to the bed. Do Not allow children to get to the
!
bed any other way.
Ensure that you check regularly that all bolts are securely fastened and all components are
!
in place. If spare parts are required, contact Rack Furniture at 1-479-715-6445 or write to us
at 2713 SE I Street Bentonville, Arkansas 72712.
Do not use product if any parts are missing.
!
Do not use substitute parts.
!
Keep these instructions in a safe place for future use.
Caution: There are many small components used in the construction of this unit. These
loose items should be kept away from young children while assembling your unit. As an
extra precaution, screw cover caps should be permanently fixed in position. (Where
applicable).
Two people will be required to assemble this unit.

Care and Maintenance:

To clean, use only mild household soap and warm water. Do not use bleach or
detergent. Do not use abrasive cleaners which can scratch the finish of the product.
Use clean soft cloths to wash, rinse and dry. With proper care, the quality finish will last
a long time. Wood surfaces may be treated with light application of a good grade of
non-toxic furniture polish.

Tools required for Assembly:

Rubber Hammer
WARNING
Phillips Screwdriver
DO NOT USE POWER TOOLS
TO ASSEMBLE THIS PRODUCT.
USE OF POWER TOOLS WILL
INVALIDATE ANY CLAIM AND
MAY DAMAGE THIS PRODUCT
MAKING IT UNSAFE.
Page 2 of 32