IMPORTANT SAFETY INSTRUCTIONS Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD.
Page 3
11. Damage requiring service---If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service person to perform repairs. a. When the power cord or plug is damaged. b. When a liquid is spilled on the product or when objects have fallen into the product.
21. Panel protection---The PDP panel used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the PDP panel breaks. 22.
PACKING LIST PDP TV User manual Remote control Batteries for Remote Controller 2xAAA 220V Power Socket 2jk424hukjiokmImportant Safety Instructions USING THE REMOTE CONTROL ● Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation.
Page 6
Precaution on battery use Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below. ● Place batteries with their terminals corresponding to the (+) and (–) indications. ● Different types of batteries have different characteristics. Do not mix batteries of different types. ●...
Page 7
Notes: ○ 1 The outdoor antenna should be installed firmly and provided with some fittings against thundering and ensure to have a regular check. ○ 2 The antenna cable should not be tied to the power cord. ○ Please keep the wrapping box and the padding well for future convenient conveyance.
Page 8
Using the Remote Control Overview Press to turn on or off the TV. 2 DISP Press to show info of current program 3 MUTE Press to mute sound or cancel mute auto mute while no signal . . - , 4 0 9 Dot Press 0 9 to select the channel the channel will change after about 2 seconds Press OK to change channels immediately In DTV mode press 0 9 and dot...
Other state of the TV Auto off without signal The TV will automatically switch off and enter into Standby mode after 5 minutes if there is no signal (in case of no program signal transmitted from the TV station or no commands from the remote control).
Page 10
Using the Picture Menu Press Menu to enter Picture Menu. Adjust the picture’s quality in picture menu. Press 【 】/【 】 to highlight the item to be adjusted. Press 【 】/【 】 to adjust parameters. Return Item Adjustment Effect Contrast Lower Higher Brightness...
Page 11
Bass To adjust the accompanying sound’s bass. Treble To adjust the accompanying sound’s treble. Balance To adjust the balance between the left and right soundtracks. Surround Use【 】/【 】 to switch the Surround Mode. Use【 】/【 】 to switch the Auto Volume Control. SPDIF Type To select the desired mode of SPDIF Type.
Page 12
Using the Setup Menu Press【MENU】 and 【 】/【 】to enter Setup Menu. Advance Menu Language There are three languages on-screen display. Transparency Use【 】/【 】to switch the transparency. Aspect Ratio Four modes to be selected: Full, Zoom, Cinema, Normal. Use【 】/【 】to select the level of Dynamic Noise Reduction. PC Set Up Setting values in the PC mode.
Page 13
Closed Caption You can switch the CC on-screen display. select the preferences and press 【 】/【OK】to enter the edit mode: Advance Use to enter the submenu. 【 】/【OK】 - - - - Hotel Mode...
Page 14
Use【 】/【 】to switch the Dynamic Luminance Control. Hotel Mode The default password of the Hotel Mode is "3690" Hotel Mode Enable On Source On Antenna Cable On Channel No. On Volume Max Volume Hotel Mode Enable When Hotel Mode Enable is On, it shows the hotel mode is open. On Source 【...
Page 15
Using the Parent Control Menu You may prevent children from watching programs not suitable for them, such as sexual or violent programs. Press MENU and 【 】/【OK】to enter Parent Control Menu. Input Four digit passwords are required. The factory default password is “0000’. The old password is invalid when password is modified.
Page 16
Press 【 】/【OK】to enter the edit mode. TV Rating TV Ratings TV-Y: All children FV: Fantasy Violence TV-Y7: Directed to older children D: Suggestive Dialogue TG-G: General Audience L: Strong Language TV-PG: Parental Guidance suggested S: Sexual situation TV-14: Parents Strongly Cautioned V: Violence TV-MA: Mature Audience only MPAA...
Page 17
Using the Channel Menu Press【MENU】and then use【 】/【 】 to select the Channel menu in TV mode. Antenna Switch the TV input mode between cable and air. Auto Search Select the Auto Search and press【 】/【 】to search the NTSC and ATSC TV programs automatically.
Page 18
Favorite Channels List all the favorite channels. Press 【OK】 to select or cancel it. Add/Erase 1. When selecting Add/Erase item, press 【OK】 to erase or recover channel. When one channel is erased, this channel would be skipped. If you want to recover this channel again, the channel number should be input through buttons on the RC.
TROUBLE SHOOTING Before calling a technician, please check the following items to see if the below mentioned symptoms can be diagnosed and fixed. Symptoms Possible Reasons Correction No picture, no sound, 1.The power cord is not plugged in 1.Plug the power cord in and no indicator light 2.The power is off 2.Turn the power on...
Page 20
Asiaventurelink Co.,Ltd. shall not be liable for the loss of the use-of the product, inconvenience, loss or any other damages, direct or consequential, arising out of the use of, or inability to use, this product or for any breach of any express or implied warranty, including the implied warranty of merchantability applicable to this product.
Need help?
Do you have a question about the APW4240N and is the answer not in the manual?
Questions and answers