2-1. Driving procedures
Starting the hybrid system
Modes can be switched by pressing the power switch when carrying the
electronic key on your person. (The hybrid system can be started in any
mode by operating the switch at the same time as depressing the brake
pedal.)
■
Changing power switch mode
■
Starting the hybrid system
Check that the parking brake is set.
STEP
1
Turn off unnecessary lights and accessories.
STEP
2
Check that the shift lever is set in "P".
STEP
3
Sit in the driver' s seat and firmly depress the brake pedal.
STEP
4
The power switch indicator turns green.
STEP
5
"OFF" mode
"ACC" mode
Some electrical components
such as the audio system can be
used.
"IG-ON" mode
All electrical components can
be used.
Press the power switch.
After a few seconds, the
"READY" light will flash and
come on with a beep sound.
The vehicle can move when the
"READY" light is on, even if the
engine is stopped.
2
101