Troubleshooting - MedeScan Aroma Diffuser Manual

Troubleshooting

Indicator not illuminated. No mist
The transformer adapter is not properly plugged or the power
switch is not turned on. Plug the transformer adaptor and turn on
the power
Indicator illuminated. No mist
There is no water in the water tank. Re ll the water tank
Indicator illuminated. No mist
The water level in the tank may be too high. Pour out some water
until below the Max line
The mist has foul odour
New unit smell or the water in the tank is not clean. Open the water
tank, allow to air dry. Clean with mild detergent and try again
Minimal mist output
There is scale formation on the transducer oscillator or the water is
dirty or has been stored for too long. Clean the transducer oscillator
and replace with clean water.
13