Samsung GT-I8350 Service Manual page 28

5
1) Disassemble the each part
VGA Module
5M CAM
SPK
Module
Shield
CAN
Disassemble the each part.
PBA ( 5M CAM, SPK, Shiled CAN, PCB)
Braket ( VGA Module, Earjack-RCV Modul, Braket assy)
7
1) Remove the 5M CAM and Shield CAM
Be careful the damage of 5M FPCB and connector.
Be careful the Chips under the shield can.
This Document can not be used without Samsung's authorization
Earjack-RCV Module
SAMSUNG Proprietary-Contents may change without notice
6 1) Unscrew SPK screw
2) Disassemble the SPK connector and
SSKModule.
Be careful the damage of SPK connector and PCB.
1) Remove the VGA Module and earjack RCV
8
Module on the braket
Be careful the damage of the parts FPCB, because of
adhesion under the part.
If you want to the disassemble the braket, OCTA and
touch Key, Please use dissolution JIG.
7-5
7. Level 2 Repair