Download Print this page
Lenoxx TT620 User Manual

Lenoxx TT620 User Manual

Turntable player with usb/sd/pc recording function

Advertisement

Quick Links

Turntable player with USB/SD/PC
recording function
Model no: TT620
User's Manual
READ THIS INSTRUCTION CAREFULLY
BEFORE USE AND STORE IN A SAFE PLACE FOR
FUTURE REFERENCE
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the TT620 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lenoxx TT620

  • Page 1 Turntable player with USB/SD/PC recording function Model no: TT620 User’s Manual READ THIS INSTRUCTION CAREFULLY BEFORE USE AND STORE IN A SAFE PLACE FOR FUTURE REFERENCE...
  • Page 2 Features Two-built-in stereo speakers; 3 speeds belt-driven turntable fit for 33 1/3, 45, 78; USB host link to PC for playing & recording; USB/SD slot for MP3 playback; FM radio frequency adjustment; Plays and records Audio files to a USB flash drive or SD card; Stereo RCA outputs to enjoy vinyl records through your home stereo speakers;...
  • Page 3: Functions And Controls

    FUNCTIONS AND CONTROLS 1. Tone arm 2. Auto-Stop Switch 3. Speed selector (33⅓/45/78 RPM) 4.Cartridge/Stylus 5. LED display screen 6. Charging LED (battery) 7. Recording button 8. Skip down/Volume down button 9. Skip up/Volume up 10.Play/PAUSE/FM TUNING button 11. Mode button 12.
  • Page 4 1. Charging LED (battery) 2. Recording button 3. Skip down/Volume down button 4. Skip up/Volume up button 5. Play/PAUSE/FM TUNING button 6. Mode button M 7. POWER OFF/ON button To turn the unit on, press and hold the power on/off button. To change modes, press the M button to switch between USB, SD, FM radio and LP playback.
  • Page 5: How To Replace The Needle

    LP Playing When in LP playback mode, Put the LP onto the platter and move the tone arm across to begin playback. To record from the LP, insert a USB STICK/SD Card then press key to begin recording and press key again to stop recording.
  • Page 6 HOW TO RECORD MUSIC INTO COMPUTER Setting up the USB Turntable ●Remove all packaging from the unit. ●Ensure that the security latch is closed so that the tone arm is not free to move. ●Ensure unit is on a solid level surface, away from sources of heat, sunlight, etc. ●Remove the protective stylus guard from the tone arm cartridge by gently pulling forwards.
  • Page 7 ●Click on ‘Finish’ to complete the installation: ●Audacity should automatically start up, if not follow the next sequence: ●The Audacity icon will now be seen on the desktop, double click on it to start Audacity running, if an icon does not appear, go to the ‘C’ drive under ‘My Computer’, click on ‘Program files’...
  • Page 8 ●The lower box enables the number of recording channels to be set, 1 is Mono and 2 is Stereo, select the Stereo option. ●Click ‘OK’ once the options have been selected: Playing a record ●This unit operates from USB DC 5V power. ●Switch on the unit by pressing the power switch on the front ●Raise the dust cover and push it back far enough until it stays upright.
  • Page 9 ●NOTE: lowering the lid whilst the record is on the Turntable will reduce the build up of dust, etc on the record which would impair the performance of the unit. Recording to computer using Audacity ●Start the record playing as described above, and press Record at the top of the Audacity window to start recording to the computer.
  • Page 10 control for the recording level. Move this control up if the recording is too quiet and down if the recording is too loud ● NOTE: the blue wave form should sit in the Audacity window such that the peaks of it stop short of the top and bottom ●...
  • Page 11: How To Replace The Stylus

    ● NOTE: In order to activate the Export to Mp3 feature, it will be necessary to copy a file named lame_enc.dll from the installation CD and paste it in the AUDACITY folder that contains the software on the hard drive that was copied earlier from the CD.