Removing The Storage Card; Charging The Battery - HTC desire 626 User Manual

9 Unboxing

Removing the storage card

1. Open the slot cover with your thumb or finger.
2. Push the storage card in to eject it from its slot.
3. To close the slot cover, slide the plastic hinge into the side and press the cover
until it clicks into place.

Charging the battery

Before you turn on and start using HTC Desire 626, it is recommended that you
charge the battery.
§ If the battery has been discharged for several days, you may need to charge
HTC Desire 626 for several minutes before powering it on.
§ Use only the adapter and the USB cable that came with HTC Desire 626 to charge
the battery. When the battery power is too low, make sure to use the power
adapter to charge, not the USB cable connection with your computer.
1. Insert the small end of the USB cable into the USB connector.
2. Insert the other end of the USB cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
§ As a safety precaution, the battery may stop charging to avoid overheating.
§ We recommend you check the temperature of the battery while you're charging.
Also, avoid charging the battery in hot environments.
§ When you're using the Internet and charging the battery, HTC Desire 626 may
become warmer. This is normal.
§ To conserve energy, unplug the power adapter from the electrical outlet after you
finish charging.