Safety Instructions Please read carefully the next safety instructions. Keep these instructions for future reference Locate the apparatus at places nearby power socket for quick power disconnection. Avoid places where the equipment can be an obstacle. Disconnect the AC power supply before cleaning the equipment. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid shall be placed on the apparatus.
User's Manual QX-60 Functional Features The QX60 systems are comprehensive, all-in-one mixer-amplifier solutions for commercial and industrial applications.These low-cost units provide all necessary features in a simple building-block format. 1. Three microphone with one line input with XLR and phantom power.
6. Phantom power switch. 7. Priority control switch. 8. Priority input through noise gate. Priority balanced audio input, with associated activation threshold control (see Ilustration 4). Ilustration4: E/S euroblock type balanced connector 9. FM Antenna. Speaker wiring. Low impedance speaker connection. 4 Ω and 8 Ω In order to connect conventional 4Ω...
User's Manual QX-60 High impedance speaker connection. 70/100V In order to parallel connect high impedance speaker systems (70/100V), connect the positive side of the speaker (+) to 70/100V terminal. Connect the negative side (-) to COM terminal. Ilustration 6: High Impedance speaker connection 70/100V Incorrect speaker connection.
Operating Overview 1. Power On: Power connection: 110 - 240V AC 50/60Hz. Press the ON/OFF switch on the front panel. 2. Phantom Power: This unit allows phantom power for the first microphone input. To enable it you must activate the corresponding switch on the rear panel. 3.
User's Manual QX-60 Media Module Ilustración 8: MP3 record player and digital tuner 1. LCD Display 2. USB 3. SD Card Slot 4. Mode 5. Vol+ (The volume increase) 6. Automatic or manual tuning up/ track search up 7. Vol- (The volume decrease) 8.
User's Manual QX-60 Specifications Model QX-60 Input sensitivity for full output at maximum gain Balanced Microphone Channel -50dB ± 3dB Balanced TELE – PAGING input -21dB ± 3dB Unbalanced AUX Channels -30dB ± 3dB Frecuency Response at 1 watt from speaker out tap. 100 Hz ~ +1.5dB -3dB...
Need help?
Do you have a question about the QX-60 and is the answer not in the manual?
Questions and answers