Turning On Your Device; Checking The Wireless Signal - Zte U.S. Cellular Home Phone Quick Start Manual

NOTE:
The "Phone 2" port can be used to connect an additional phone.

This port uses the same telephone number as the "Phone 1" port.

Put the device at least 2.5 meters away from the connected
phone, TV sets, radio and other electronic devices to avoid
electromagnetic interference.

Turning on Your Device

Press and hold the power button about 8 seconds until the signal
strength light comes on.

Checking the Wireless Signal

1. Raise antenna to an upright position.
2. Confirm signal strength light is green for optimal performance.
NOTE: If there is a yellow light,
please change the installation
location.
9