Download Print this page

JDS Uniphase HST-3000 Ethernet SIM Product Manual

Test electrical and optical ethernet up to 1g

Advertisement

Quick Links

HST-3000 Ethernet SIM
Test Electrical and Optical Ethernet up to 1G
HST-3000
V
HST-3000
Figure 1.Testing IP traffic on a Metro network
:
www.jdsu.com
WEBSITE
ACTERNA TEST & MEASUREMENT SOLUTIONS
Key Features
• Electrical and optical Ethernet testing in one module
• Traffic generation at full line rate or variable loads to test
services at layer 2 and 3
• 'Thru Mode' to measure live traffic
• Cable diagnostics to identify and locate electrical faults
• Scripted RFC 2544 benchmark testing
• Loopback L2 or L3 traffic from any instrument in JDSU's
Ethernet portfolio
As networks migrate from circuit-switched to packet-switched architectures,
Ethernet services are being pushed out of the network core and toward the edge.
Therefore, service providers must equip their technicians to adequately turn up
and troubleshoot this new technology while continuing to support their legacy
T/E carrier services.
While the majority of today's Ethernet links carry only data traffic, Voice over IP
(VoIP) and IP Video are becoming more common. These triple-play networks,
which transmit voice, video, and data traffic, present a unique set of challenges.
Service providers for these network environments are now responsible for
delivering a layer 7 service, rather than a traditional layer 2 or layer 3 pipe.
The HST-3000, equipped with the Ethernet Service Interface Module (SIM),
addresses this requirement for 7-layer testing in a rugged, modular platform that
is ideal for field use. It has a full Ethernet feature set for testing both electrical and
optical links with data rates up to 1 Gb/s. The HST-3000 also offers multiple
stream support for the verification of prioritization schemes and advanced
monitoring options for advanced troubleshooting capabilities. In addition, the
HST-3000's VoIP and IP Video options allow technicians to emulate the end
customer's user experience and objectively measure quality of service.
Provider Core
Metro Network
Backbone Network
HST-3000
Metro Network
V
HST-3000

Advertisement

loading

Summary of Contents for JDS Uniphase HST-3000 Ethernet SIM

  • Page 1 ACTERNA TEST & MEASUREMENT SOLUTIONS HST-3000 Ethernet SIM Test Electrical and Optical Ethernet up to 1G Key Features • Electrical and optical Ethernet testing in one module • Traffic generation at full line rate or variable loads to test services at layer 2 and 3 •...
  • Page 2: Product Features

    Bi-Directional Monitoring/Thru Mode The dual ports (both optical and electrical) on the HST-3000 Ethernet SIM enable technicians to gain access to circuits under test in order to perform in-service monitoring in both directions. Not only does this simplify sectionalization of the network, it also allows for the analysis of live customer traffic without the use of a splitter.
  • Page 3 Video transport stream analysis is provided as well as video quality of service measurements, including packet jitter, packet loss, IGMP latency, and program clock reference (PCR) jitter analysis. 1G Ethernet 1G Ethernet OC-3/STM-1 HST-3000 HST-3000 Figure 2. Class-of-service testing using the HST-3000 Ethernet SIM with the Multiple Streams option...
  • Page 4: Specifications

    Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase Corporation. All rights reserved. 30137549 000 0506 HSTETHERSIM.DS.ACC.TM.AE Test &...